Sorry I have not installed either kit on an XP Pro. However I have looked at these kits and stock them and either kit will work great. Both have quality parts and function is about the same. Please call or PM if you need any more info than in the link below. Forum discounts apply.

Polaris RZR Pro XP 4

We Sell parts for the Polaris RZR Pro XP 4, Buy Parts for your Polaris RZR Pro XP 4 here at Pro UTV Parts

www.proutvparts.com

 

Not a Pro XP but a XPT4 - no matter. I have the XTC kit and it is easy to install and works ok. However it is not waterproof and when it gets wet (washing) the turn signal relay toggles on/off by itself. Once it dries out it stops but it has always been a concern. I have heard numerous others with the same issue.

 

I haven't installed one on the Pro Xp yet but I had the Corbin one on my X3. Chris with Corbin is awesome to deal with and high quality parts!

 

craigstumph sent a pm to you. Rzr joe thanks for letting us know about the switches issue. i probably go with the corbin kit.

 

rycomoto is plug and play i put on mine

 

rycomoto is plug and play it uses the tail lights. i put it on mine love it

 

We installed Corbin kit on pro XP works great.


Sent from my iPhone using RZRForums.net

 

Bradley do you have a aftermarket bumper on your pro xp ? i been debating on the corbin kit, i have the high profile bumper from polaris ordered. I want to make sure there is no bar in the way.

 

Installed the XTC in my XP Pro. I order the XP Pro version and the box they shipped said XP 1000. Installed just fine. Drilled a couple of holes for the front signals and mounted the horn. The whole project took about 3 hours. I tend to spend a lot of time routing cables and adding protections where wearing might occur.

My suggestion would be installing all your wiring items at the same time if possible. Taking apart the center console and dash over and over is not fun. I pre-ran a bunch of rockers and cabled them to areas I knew I would be installing lighting in the future. Rock lights, light bar, interior lights, etc..Made for quick connection when I actually bought the additional lights.
I bought 4 of the "Nilight 10011W 16AWG Wiring Harness Kit" from Amazon and pre-wired those.

Cheers!

 

We’re you able to hook this up to the dash indicator lights? I installed mine and was told it would connect to the dash indicator lights but I don’t see how. Thanks.


Sent from my iPhone using RZRForums.net

 

I used the corbin kit and had factory mustache light converted to work as turn signals.

 

Jakef where did you have the mustache light converted to make work? that is neat. That's the bumper i am going to put on mine when it comes in. so it makes me wonder if the lights corbin give you if you would see them.

 

Dave, The bullet lights are not overly visible with the bumper. I've seen several people mount them in the bumper itself, that's what we did on dad's last rzr. I was wanting something like the turbo s have with fang lights. I saw some custom work Zac Wagz Wagner on Facebook had done and asked if he could do two for me. He had a light and converted it, sent to me and then I shipped my core back to him to be converted for dads. We talked in between and he made a couple changes on dads that made it even easier for connecting. Dads light uses the factory plug on the stock light to power & ground it and only adds two wires to trigger left or right amber. If you decide to get one and don't have FB I can get you his contact information.

 

Is anyone doing the mustache light as a kit? Or do you have to send it to this guy for custom work? I would like mine like this also. I am off the grid and do not have Facebook. Would you mind sending me his contact information?

 

Thanks Jake, if you want to send the info on Zac that would great, where is he from? Dave

 

Dave I sent you a PM with his number. He's in Pennsylvania.

 

Has anyone installed a turn signal kit in their Xp Pro yet? I have looked at the Xtc plug and play kit and the Corbin kit Is either one better than the other? I picked my my XP Pro yesterday and thinking is to put anything on that use switches to put it in one time, it looks like a big process putting in switches? Any input would be greatly appreciated.

Check out SuperATV’s kit


Sent from my iPhone using Tapatalk

 

Rycomoto is in mine and no issues. Horn is include and plug and play. The best part is the lever no switches like the other ones.

 

Did you buy the complete street legal kit or just a turn signal kit from Ryco? Are the headlights with the orange eyebrow lights plug and play with the Ryco turn signal kit?

 

@bug1964 does your XTC have auto cancelling??

 

Yes it does.


Sent from my iPhone using RZRForums.net

 

I put the Corbin kit on my 19 xpt4 and it works well, I put the front lights in a different spot because my bumper would have blocked them. The instructions are good and the switch or switches are no problem to install.

 

BID Front Signature Light Headlight White/Yellow for Polaris RZR PRO XP / 4 2020 | eBay

RZR PRO XP 2020. Maverick X3 2020. 2020 POLARIS RZR PRO XP. 2020 POLARIS RZR PRO XP PREMIUM. 2020 POLARIS RZR PRO XP ULTIMATE. 2020 POLARIS RZR PRO XP 4. 2020 POLARIS RZR PRO XP 4 PREMIUM. 2020 POLARIS RZR PRO XP 4 ULTIMATE.

www.ebay.com

 

We have the Ryco self cancelling kits also:

Ryco Street Legal Kit for Polaris RZR Pro XP/Turbo S/Turbo/1000/900 2014+

Free Shipping in the lower 48 States! All RZR Kits Now with BRAKE STROBE INTERFACE Ryco street legal kits have a turn signal with an integrated horn button and emergency flashers. The Ryco kit interfaces with the gauge pod in most UTVs to show when the turn signal is actuated. On the Polaris...

6zp4pvirykc09qkn-3312341.shopifypreview.com

 

I bought the complete kit from Ryco thru Craig at utvproparts. The headlights where done buy someone close to me in southern Cali, they now make some headlights that I have seen on eBay that you all might want to check out to add to the kit, if I was doing it now I would try the eBay headlights out.

 

I just want the rear signal pigtail so I can wire my blinker system to the brake lights. I can't find the pigtail without buying the entire kit. Anybody know where to buy just that pigtail?

 

is it this style?? AMAZON LINK

 

No, the XP Pro has 8 wires

 

I installed the Corbin kit, swapped the headlights and used their horn. Love it.

 

i had recently installed the XTC Self Cancelling. couldn't be more pleased. and thank you @craigstumph

 

Hey Mozart
We’re you able to get the turn signal indicators on the dash to work with the XTC kit? If so, how’d you do it??


Sent from my iPhone using RZRForums.net

 

yes. its the tan wire and connected to pin 6(??) in the cluster

 

what does pin 6 do
will it show you a left and a right arrow or ??? or just one indicator flashing with either one