Polaris RZR Forum - RZR Forums.net banner

Soundbar suggestions

12K views 22 replies 9 participants last post by  JLPXTP  
#1 ·
My little bt speakers are but so good and the xp isn’t a quiet machine lol, what are some of the sound bar or sound systems you guys/gals are using barring the 3k plus systems.
 
#7 ·
Well, I know what I said and I don’t think you’re getting it either, you want to wear a headset that’s fine, I’m not knocking you but clearly this thread wasn’t here for you to advocate headsets and assume that I listen to music at an offensive level. So unless we’re going to talk about sound bars…
 
#5 ·
90% of every audio thread is headset suggestions. 🤣. If I was trying to do a budget audio build, I'd do a bluetooth rocker switch, some enclosures off Amazon or ebay, a 4 channel marine amp and some Polk db652 speakers. Or 5 channel amp and glove box sub if you want some bass. Lots of threads on audio if you do a search or just look in the audio section.
 
#8 ·
I don’t know if it’s for you or not but I’ve had good luck with just a single din Pioneer head unit and four 6.5” speakers in SSV pods. I have two on the cage in the rear and two up front just under the dash. I had the two front 6.5’s in the the factory doors before I installed aftermarket doors. With just the head unit powering them it has been plenty loud enough for me. I’ve had this radio in the last two RZR’s and it gets hit with the pressure washer and plenty of dust with no problems yet.

Image
 
#10 ·
I've got a EcoXGear 26". Its alright and does the job. But compared to my buddies $4k Rockford its garbage lol but I wasnt willing to spend that kind of money on music after the build I did on my rzr.
 
  • Like
Reactions: JLPXTP
#15 ·
Thanks everyone, I appreciate the info. After much thinking I went ahead and got the Wetsounds Stealth XT 12-B. I like it because it’s expandable, not covered in LED’s and was cheaper than the Garmin set up by several hundred bucks, plus a thirty day return policy that’s on point. Should be here Saturday, I’ll post pics and impressions once installed.

Image
 
#23 ·
Okay so all is working but my goodness what a monkey wrench lol, the pig tails I got for the pulse bar were wrong, constant 24v was were the accessory should be and vice versa, took quite a bit of head scratching but once I figured that out it all fell into place. Side note, what and absolute horrible location for that pulse bar on the 22 Rzr pro xp, that could have easily gone under the front removable hood for much easier access.