How are you going to attach?

 

My enclosure has cutout/button up sections around the roll cage at the lower section where they would mount, so I don't think that would be a problem. The way the windshield sits flush against the cage concerns me more.

 

I installed xprite mirros and had no issues with the front windshield. Purchased on amazon.

 

Do you want lighting, forward facing and/or turn signals built into the mirror?

 

Here are a lot of mirrors to look at.

Search: 372 results found for "mirrors"

UTV and SXS Parts and Accessories - PRO UTV Parts mission is to satisfy our customer's needs. Pro UTV parts specializes in parts to enhance your off-roading experience while looking good. Pro UTV Parts is located in Delta Utah, the heart of the Great Basin, Piute ATV/UTV Trail System, and Little...

www.proutvparts.com

I use these two mirrors. They are practically indestructible and very clear. The clamp also works well with windshields.

Navigator Mirrors By Sector 7 With Universal Clamps or M10-1.25 Threaded Ball Mount

SKU: S7-MN-001 Description Finally, high quality UTV side-view mirrors with a large viewing window that stays vibration-free while running the trails. Equipped with patent pending Adjustable & Reversible Tube Clamps that fit from 1.25”–2” Tubes. Reversible clamps are compatible with windshield...

www.proutvparts.com

Spectrum ULTIMATE LIGHT / MIRROR with Universal Clamp by Sector Seven

At an impressive 7,350 lumens per 10” section, the brightest just got up to 50% brighter. The OnX6™ LED light bar also integrates Baja Designs’ trademarked High Speed Spot™ reflector, the same one used by our Team Enlightened racers, to give you the guaranteed furthest projecting LED Light Bar...

www.proutvparts.com

 

I have chupacabra side mirrors.. both of them are loose from the ball mount.. annoying, don’t believe I can tighten them, just ask the co driver to readjust the mirror every now and then on a long ride. 4/10

 

There should be an adjustment screws on them.

 

I have this setup on my Pro R. Cuero Race Mirror / Baja Designs XL80 Light Combo
I have found side mirrors to be almost pointless as the rear of the machine is so wide with mirrors mounted to the cage you can’t see much behind you when backing up. I do like the Chupacabra rear view mirror. And have not had issues with the mirrors not staying in place.

 

For a lighted mirror...Sector Seven Prizm's are by far at the top of the food chain...an unbelievable amount of light with a very wide spread. They annihilate every setup I have seen...and I believe that I have seen them all.

Chris
Bottom Line Racing

 

Yes Sector Seven has the most light and also has the best view in mirrors. Use this discount code at checkout for a deal "Sector Seven"

Sector Seven PRIZM LED Lighted Mirrors

SKU: S7-TR-000 (mirrors only) SKU: S7-TR-000/S7-CL-008 (mirrors + Infinity Mount) Installation is a breeze with the available Infinity Mount, a versatile tube clamp compatible with cage sizes ranging from 1.75″ to 2″. The included Threaded Ball Pivot pairs perfectly with custom cages featuring a...

www.proutvparts.com

 

Sector Seven PRIZM mirrors is what I run on mine.

 

Too pricey!!! That’s almost embarrassing.

 

I am not embarrassed. I use these extremely good mirrors to place my rear tires to climb tough stuff (see photo). These mirrors have the best optics I have found. Works better than cameras. I use the top two for general rear visibility. I use the bottom two to view the rear tires. I hardly ever use my cameras. There is one high res camera you can see on the front top of the roof and one in back.

 

Pro Armor has a new mirror set out (at least they say its new) that I'm probably going to try out. Pro Armor Mirrors

Right now I have Seizmik PURSUIT aluminum mirrors. Thee have been great, but I want to try something that looks cooler.

 

Here is Pro Armor's new mirror.

Pro Armor Side View Mirror

Pro Armor Side View Mirrors are a useful and stylish addition to your SXS. Constructed with a lightweight all-aluminum body and a high grade aluminum bezel they are designed to be strong and lightweight adding visibility to your ride. The unique design means that they are fully adjustable and...

www.proutvparts.com

 

Yeah, I'm ordering a pair from you. Gotta try them out. The only concern I have is that the cage clamp doesn't completely encircle cage pillar.

 

I like that it has integrated pod light mounting.

 

That is not a problem.

 

Here is another I just found. I think this is a newer revised Chupacabra design (I think). I like this PRO version better than the Race version. Might hold in place better due to the shorter ball joint arms... Just guessing.
Chupacabra

 

Discount code for checkout. "Chupacabra Offroad "

Chupacabra - Cuero Pro UTV Side Mirror (Set of Two)

We took everything our customers loved about our best-selling Cuero Side Mirrors and made them better in every way! Installation PDF - Click to Download The Cuero Pro offers a new stylish design with a larger viewing area, thanks to an increased size convex glass mirror. With an improved...

www.proutvparts.com

 

I threw on a set of RZR mirrors on mine. One thing, doesnt really matter what you have for a rear view if you are using the stock spare tire carrier. Cant see past the rear fenders on the side either. I use them to track dust more than seeing whats directly behind me.