I used this turn signal kit and a DOT turn signal

http://www.rzrforums.net/general-rz...ral-rzr-discussion/37150-can-any-one-tell-me-how-remove-bolt-see-pic-below.html

 

I used 8” amber led light strip. It was actually a marker light. Got a electronic two pin flasher. Two lite rocker panels and some red and black 16 gauge wire. I already had added a 6 position fuse block so I wired it into that with a 10 amp fuse. Just finished it last night. Very bright and works perfect.

 

I used some led lights but they dont use enouph power for a flasher to work properly so had to add a couple relays now they work great you can get some resistors to add a load so theflasher will work + get a flasher/flashers for a motorcycle with led turn signals , then an on off on rocker switch or a generic turn signal switch for your colom I probably have less than 30.00 in my signals