Polaris RZR Forum - RZR Forums.net banner

When to drive in High vs. Low...

13685 Views 8 Replies 8 Participants Last post by  allcool
I've been told by a few people that driving in Low whenever possible will help the belt last longer, but I can't bring myself to drive faster than 10 or 12 mph in Low because the RPM's sound too high. so the question is... when is it good to drive in Low, and how fast can you drive in Low? Is it really going to help the belt last longer to drive in Low?
1 - 2 of 9 Posts
that's perfect. thanks guys. The reason I asked is because I've climbed a few mountain ranges with it, and I know I will be in low for a big chunk with maybe 200 yards of flat terrain. but then I'll need low again. It's a pain to have to stop, switch gears, then go again. now I know I can stay in low and just keep it under 20 mph for those short bursts. thanks for the info!
1 - 2 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.