I want a freaking chain saw clamp/holder. There is a couple threads on here about them but as of yet I haven't found a solution. When I carry my saw I have to remove my lock and ride box and even then the saw just doesn't ride well in the bed due to the dip in the middle.

 

a solution to the clutch squeeling when your going down a steep hill and your off the throttle..... might be a bit much to ask but it would be nice.

 

Modify your 5 1/4 speaker pod to fit 6 1/2's

 

Shoulder height doors that open, please!

 

diddo but have a bend were your elbow is so you don't hit them.

 

Thanks for the ideas guys all great ideas for new products, looks like we'll be adding be adding a few things to the drawing board.

 

How about a 2" hitch receiver plug, with a billet "RZR" logo?

I keep asking people to make those!!!

 

That would be sharp, good idea.

 

Ok, I get the first prototype free, because it was my idea! :lol:

 

a rzr faster than big mikes weber!!!!!!

 

x2

 

x2 for a chainsaw mount, lots of market for one and nobody makes it!

 

x3 on the chainsaw mount. Also a zip out or quick release rear window that is fairly light weight but can still handle going 60 mph. A block off kit that costs $25 or less. And last of all your style 2" receiver hitch that will fit on a 2009 with the welded hitch.

 

Since we're talking about mounts. How about a shotgun/rifle mount thats reasonably priced?

 

A little more on a chainsaw mount. Make it quick detachable so you can get to the saw quickly when needed. Perhaps mounted vertically off the roll bar behind the drivers head with the blade pointing straight down?

 

A hardened pinion shaft for the guys with lifts an big tires breaking them.

 

Clutch belt manfactured to the same spec's as the Polaris belt # 3211130 using Kevlar cordage.

Dave

 

some kind of grab handle to mount over or above the gear shifter...I have a bad habbit of resting my hand on the shifter while riding, and more than once I have hit a big bump and knocked mine out of gear...thats not a good sound while doing around 50mph on the dunes.

Just a simple "hoop" right around the shift lever to rest your right hand on, I always drive with my left hand and keep my right one on the shifter, I guess that carried over from driving my F-150 with a 5 speed manual.

oh yeah, and if you produce this...you have to call it the Langford handle or something similar lol

 

how about a fuel tank protection bracket for the back of the fuel tank. its completely exposed and super expensive to replace the tank if you have a stick kick up and break the tank

 

X2

I can't believe how exposed the fuel tank is, especially being so close to the exhaust!

 

dual rate springs for stock shocks. floor mats to keep out the dust but you can pull them out for clean up and still have drain holes. a water tight box that fits exactly in the space up front. Decent shocks that run around $500

 

How about a Snorkel kit as well. One that comes up on each side the cage and one that comes up the middle. with 90degree turn downs and 180degree turn downs. Also make it go to the top the cage that way the buyer can make it the height he/she likes.

 

some rolll cages, would be nice

 

We will be offering some cages in late june/ july sometime there in production right now!

Tyler
SuperATV.com
(812)574-7777

 

I'm still waiting on the chainsaw mount and the +3 kit

 

a xc LT kit. like mabie a plus 2 with some max ground clearance a-arms. also a power steering unit with a built in steering reducer would be nice a good size reduce also 2.5 to 1 or mabie 3 to 1. would be verry nice to be able to make it turn all the way to lock without ever having to move your hands.

 

Biohazard hit the nail on the head.. XC LT.. I want more ground clearance and a little wider for trails.. EXACTLY. I dont want to be 60 wide or I'd buy a RZR S. I'm good with 55-56" like a rhino but with more ground clearance Like an S.. Lots of people I ride with want the same for trails and mud..

 

x2... on the 2" reciever hitch on an 09 with the welded one. Thanks tightline

 

I would like to see you make a bed storage box that would fit much like the polaris box but cost much less.

I would be happy to help you with west coast testing if you come out with one :rofl3:

 

i have lost of wants... but need more power