Polaris RZR Forum - RZR Forums.net banner

41 - 60 of 101 Posts

·
Vendor
Joined
·
21,155 Posts
Discussion Starter #48
Wanting an easy attachment spot for your tie down hook on your Polaris RZR UTV model? This kit will give you 4 tie down spots on the suspension of your Polaris RZR UTV! Uses all stock hardware and bolts to the bottom of the shocks. Sold as a kit of 4.

*Kit has been test fit on Polaris RZR XP 1000, XP Turbo, RS1, and XP Turbo S. May fit other models as well, but have verified fitment on these units.

UTVINC.com: https://www.utvinc.com/utv-inc-polaris-rzr-suspenion-tie-down-bracket-kit/
Amazon: https://www.amazon.com/UTV-INC-Polaris-Suspension-Down/dp/B07PJVDTGG/ref=sr_1_2?keywords=UTV+INC+RZR+tie&qid=1565366392&s=gateway&sr=8-2
Ebay: https://www.ebay.com/itm/223617913259





 

·
Premium Member
Joined
·
1,039 Posts
Like the idea- and would like to know if they can be used on the top mount anywhere- cause I know it's tight even using the stock bolt remounting new shocks.
We really like to ratchet them down to compress the suspension so it doesn't bobble over the not so smooth highways at speeds..
 

·
Vendor
Joined
·
21,155 Posts
Discussion Starter #51
Like the idea- and would like to know if they can be used on the top mount anywhere- cause I know it's tight even using the stock bolt remounting new shocks.
We really like to ratchet them down to compress the suspension so it doesn't bobble over the not so smooth highways at speeds..
I doubt they would work on the upper mounts due to space issues, but we haven't tried to mount them in that fashion.
 

·
Premium Member
Joined
·
1,039 Posts
Thanks- Ya cause the stock location on the upper part of the frame are not to tough... Sucking the suspension down ( not collapsing) but a good snug ratchet sure prevent body sway-- lost of wash board roads up here.

Like your Idea though.
 

·
Vendor
Joined
·
21,155 Posts
Discussion Starter #54
Wanting an easy attachment spot for your tie down hook on your Polaris RZR UTV model? This kit will give you 4 tie down spots on the suspension of your Polaris RZR UTV! Uses all stock hardware and bolts to the bottom of the shocks. Sold as a kit of 4.

Kit has been test fit on Polaris RZR XP 1000, XP Turbo, RS1, and XP Turbo S. May fit other models as well, but have verified fitment on these units.

LINK: https://www.utvinc.com/utv-inc-polaris-rzr-suspenion-tie-down-bracket-kit/


 

·
Vendor
Joined
·
21,155 Posts
Discussion Starter #56
Wanting an easy attachment spot for your tie down hook on your Polaris RZR UTV model? This kit will give you 4 tie down spots on the suspension of your Polaris RZR UTV! Uses all stock hardware and bolts to the bottom of the shocks. Sold as a kit of 4.

Kit has been test fit on Polaris RZR XP 1000, XP Turbo, RS1, and XP Turbo S. May fit other models as well, but have verified fitment on these units.

LINK: https://www.utvinc.com/utv-inc-polaris-rzr-suspenion-tie-down-bracket-kit/

 

·
Vendor
Joined
·
21,155 Posts
Discussion Starter #59
Wanting an easy attachment spot for your tie down hook on your Polaris RZR UTV model? This kit will give you 4 tie down spots on the suspension of your Polaris RZR UTV! Uses all stock hardware and bolts to the bottom of the shocks. Sold as a kit of 4.

Kit has been test fit on Polaris RZR XP 1000, XP Turbo, RS1, and XP Turbo S. May fit other models as well, but have verified fitment on these units.

LINK: https://www.utvinc.com/utv-inc-polaris-rzr-suspenion-tie-down-bracket-kit/

 
41 - 60 of 101 Posts
Top