I’m new here, just purchased my first RZR XP 1000, stock tires need to be replaced. Currently have 29x9x14, looking at 30x10x14, would a 32x10x14 work?. Any recommendations on sizes?
Cheeto#1
Yes that should work. It is depending on what type of riding you do, I'm going to go 30" and I do trial riding and a bunch of high speed stuff.
And if you do bigger then 30" you are going to want a clutch kit.
And if you do bigger then 30" you are going to want a clutch kit.
I went up to 30" tires (used) and then bought a set of 32" XTR370's. (Love these tires!)
I haven't touched the clutch, but I did the gear reduction.
We do east coast mountain trails and rock crawling.
Mostly slow stuff over big obstacles.
I haven't touched the clutch, but I did the gear reduction.
We do east coast mountain trails and rock crawling.
Mostly slow stuff over big obstacles.
I went from 30" carni's to 32" K9's. I would never go back to 30"s. I do a mix of slow and high speed trail riding. I would avoid a full blown clutch kit unless completely necessary. Try an EPI grey secondary spring for $30. That brought my clutch engagement rpms back down to stock range(1850). I haven't had any belt slip at all with the new spring and belt temps have never been an issue yet(I run an Aim gauge).
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
