[xcountryguy04x]

Im thinking of upgrading my 08 rzr to somthing a little more comfortable at high speeds. Iv found a couple complete kits with rhino complete axles for 1300 bucks, just gotta find some shocks. Is the stock s suspension worth the money or should I spend a little more and go aftermarket? Iv never rode in an S or any with long travel for that matter. I know the frame needs strengthened, iv got that covered. Any Input??

 

[08rzrCT]

Check out afco suspension @: Makin Trax Suspension UTV Shocks
I believe they are only several hundred more dollars than the fox shocks and I have heard they are top notch.
Then there is always elkas or one other brand that is escaping my mind right now.
You should check out the progressive rate springs at makin trax too. Pretty cheap upgrade to make a big difference.

 

[Makin' Trax]

We have three models that will work for the "S" suspension. MT-2, MT-3 and the Silver Series. All are valved and sprung specifically for the "S". Give us a call and/or check out our website, Makin Trax Suspension UTV Shocks

 

[johnnycat8]

mt2's with remote ressies...and progressive springs

 

[Norcal RZR]

Steve,

After I put on my progressive kit.....do I need the re-valve? what does it do?

Bruce

 

[xcountryguy04x]

I am refering to the actual long travel arms, but thanks, i will check you out when i start ordering stuff.......

 

[Makin' Trax]

Steve,

After I put on my progressive kit.....do I need the re-valve? what does it do?

Bruce

Re-valving the rears is a good idea. Due to the heavier spring rate on the rear, a bit more rebound control is needed. Then I make some changes to the compression side that is the icing on the cake.

 

[Makin' Trax]

mt2's with remote ressies...and progressive springs

Are those your shock tuning tools there John?

 

[Makin' Trax]

I am refering to the actual long travel arms, but thanks, i will check you out when i start ordering stuff.......

I think it is worth it. You can also really improve your ride with a LSR +4 kit. We have a great arm kit/shock combo deal right now.

 

[johnnycat8]

mt2's with remote ressies...and progressive springs

Are those your shock tuning tools there John?

lol no that's my c/v strap holding tool so i could cut the excess off....

 

[johnnycat8]

here is my shock adjusting tool....YOU!!!!!