Polaris RZR Forum - RZR Forums.net banner

starter cables rubbing through transmission case

1384 Views 6 Replies 3 Participants Last post by  MotoXXX
When MotoXXX and I were installing a turbo on his RZR we noticed that the starter cables had been rubbing on the transmission case so much that they were wearing grooves into the case. These cases aren't super thick, so we moved the cables to the other side of the vent line to rub in a new spot.

I checked mine today and it was the same.
Here is a cell phone pic of the wear spots on mine:

See less See more
1 - 1 of 7 Posts
Thanks for posting that Cliff, I was going to do it but forgot about it! It sounds like every machine out there is prolly like mine was.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.