Polaris RZR Forum - RZR Forums.net banner

1 - 2 of 2 Posts

·
Registered
Joined
·
209 Posts
Discussion Starter #1
I think my shifter cable requires more force to move than it should. Is there a way to lube it and with what? If not, I'm guessing you just replace it...I assume this is a dealer part, how much?

Thanks in advance.
 

·
Registered
Joined
·
1,085 Posts
Mine had corrosion in the ends from water getting past the bellows. I slipped back the bellows and use some emery cloth to remove what corrosion I could. Then I took the pins off both ends and worked the cable back and forth with some WD40 until it started working smooth again. Works like new again.
 
1 - 2 of 2 Posts
Top