It looks to be M10X1.25X95 according to the parts catalog at Rocky Mountain ATV.

3 7519043 SCR-HXFL-M10X1.25X95 10.9 ZOD $5.38 10+ In-Stock

https://www.rockymountainatvmc.com/oem-schematic/2

 

awesome thanks so much Ive been looking and asking everywhere for that info!! Thanks!

 

That does not seem right, 10m diameter, 1.25 pitch and 95mm inches long which is close to 4" long


WE have some of those screws and Team said they were special screws, so I bought some from them

Sounds more like the bolt that holds the clutch on, not the screws that hold the helix on

Todd

 

You bet.

 

In rereading this. I think you're correct Todd. I looked up the secondary bolt for him. If he needs the little bolts for the helix, it doesn't state the size.

 

Thought so and I asked them what size they were and they stated something custom

I have no idea what size they are and I don't have a way to figure it out even though I have some

Todd

 

Yes I figured out that was the wrong size real quick when I went to the store lol. I have actually screwed up by breaking 3 of the bolts I am talking about off. I drilled them out. Can yall recommend a filler that I can fill the holes with and try to tap new holes?

Thanks!

 

10-32x0.625 helix screw.. conversion to 5mmx.080 that matched. Chased loctite out with tap...found screws at Ace hardware.