Polaris RZR Forum - RZR Forums.net banner

"S" turbo owners with no shim - Gauging boost/gas combos

3664 Views 32 Replies 12 Participants Last post by  bigmike58
Just trying to get this aero kit dialed in with boost, AFR's, and cluthing. I think first off, I need to get a stable boost and gas combo and build from that. What are your guys setups currently??
1 - 1 of 33 Posts
Like chris was saying dont go over 8 PSI on a stock RZR engine, especially if its a newer rzr. You WILL TWIST THE CRANK!!

Good luck :)
1 - 1 of 33 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.