Joined
·
2,823 Posts
I don't need graphics...hope to have doors by sand mountain trip...
RZR Doors by Race Proven Motors
81 - 100 of 124 Posts
X2 where are the graphics for the LE? Been waiting a very long time for those.
Joined
·
770 Posts
I think it's going to have to be make your own, the texture of the door skins is for keeping dirt,mud,scratches and unfortunately stickers. I have tried several different types and methods of appling them to the door and they always come off... I know Mike would to offer us something but there seems to be nothing out there he can stand behind as a good product. My .02
Joined
·
757 Posts
likely those looking to apply graphics will get a smooth semi gloss powdercoat as it will adhere better. However, we have applied the graphics to the texture powdercoat and it sticks pretty good. Keep in mind we are using motocross quality 3m laminated material not a cheap/thin sticker wrap.
LE graphics are in the pipeline, but we have a bazzilion other things going on so i wouldnt hold your breath... sorry :-(
LE graphics are in the pipeline, but we have a bazzilion other things going on so i wouldnt hold your breath... sorry :-(
Joined
·
332 Posts
Need graphics for the rpm doors? Contact us at [email protected] we can take care of you. We just made some kits for mike on his rzr, take a look.
Attachments
Joined
·
3,728 Posts
Those low profile doors are bad a$$!!! Is there any kind of outward bow in them for a bit more leg room for us tall guys?
Joined
·
3,728 Posts
Nevermind, I just read the complete thread and found the answer...
Joined
·
127 Posts
I have a few questions regarding your low doors.
1. Have you fit them to the 2012 XP 900 models yet?
2. Will they fit most aftermarket cages?
3. How much price difference between steel vs. Alum?
4. Would you sell the frame & Latch only?
Thank you
Joined
·
757 Posts
Yes we've installed them on 2012s, they should fit most aftermarket cages (we've slotted the mounting holes for various b pillar installations), and we are only making them in aluminum now.
As for the frame question, I suppose we could however if you are capable of hanging the door frame and making the latching brackets etc im sure you can probably just as easily make the door frame. That's probably the easiest part.
As for the frame question, I suppose we could however if you are capable of hanging the door frame and making the latching brackets etc im sure you can probably just as easily make the door frame. That's probably the easiest part.
Joined
·
126 Posts
I purchased the RPM Low profile doors from Mike and just got them installed. High quality product and no rattles. Doors close and fit like a glove. Needed to do a little shimming of the doors due to the XP frame tolerances being off other than that great product. Also, installed the proline graphics for these doors. I will have photos up soon.
Joined
·
127 Posts
The reason why I was asking about the frame is I wanted to have the panels Zeus tabbed vs. riveted in and a close friend of mine does that kind aluminum work, but just not to extent of making the doors since he is not in the business of that.
Also you are stating i would still need to make the latching brackets regardless?
Joined
·
757 Posts
For the last several months the doors have come standard with dzus fasteners!!
![]()
Joined
·
757 Posts
And with graphics by Proline Wraps
![]()
Joined
·
757 Posts
not that i recall. we are getting a batch back from powdercoat anyday and i could take a pic but they wont be mounted on a car. i'm sure there are some people here who could chime in.
Joined
·
770 Posts
I don't know what the dzus is but this is the Low profile doors.
Latches
Opens Automotive style
Joined
·
127 Posts
Thanks Mike....a couple more questions. You stated that you are getting some back from powder coat. Is possible to purchase some that haven't been powder coated? If it is possible let me know if I should call you or just order via your website.
Thanks
81 - 100 of 124 Posts
