Looks good RD, as always.
when is the lift kit for the 900 going to be availiable.
when is the lift kit for the 900 going to be availiable.
RZR 900 XP Rear Hitch.
3
Sneak peak pre sand blasting and powder coating, and showing off the heavy duty welds and heavy duty.....EVERYTHING!
This will accommodate a standard automotive draw bar and the gussets are made so you can use them as tie down points or tow points. Everything is 1/4" thick steel and welded from both sides of the plate. The Receiver is made with 1/4" wall Hitch stock, not just thin C Channel with a thin bottom plate welded in to close it off.
I'll post more pics after powder coating, I plan to coat 1 in red and 1 in black for starters...
![]()
![]()
![]()
This will accommodate a standard automotive draw bar and the gussets are made so you can use them as tie down points or tow points. Everything is 1/4" thick steel and welded from both sides of the plate. The Receiver is made with 1/4" wall Hitch stock, not just thin C Channel with a thin bottom plate welded in to close it off.
I'll post more pics after powder coating, I plan to coat 1 in red and 1 in black for starters...
1 - 2 of 9 Posts
1 - 2 of 9 Posts
