Drill out the back side and use longer bolts


Sent from my iPhone using Tapatalk

 

McMaster-Carr

Or, get some riv nuts.

 

If i were to make my own i wouldnt use those holes. I'd weld receivers onto the frame around the holes. It'd be stronger and you could still take the sliders off to get the rocker plastics off.

 

I thought the stock ones used a dowel into the hole with a plate around it that reaches the very close factory bolts?

 

A friend of mine made these, they have the stud welded to them and the bars were notched to fit flush with frame. I think they turned out pretty good, just had to watch drilling out hole on passenger center since it was close to gas tank but still had room for washer and self locking nut

 

Another

 

So you don't have to drill, call up houser racing and get a set of there mounting bolts best I've seen and there re-useable. They have videos on YouTube. Search for there tree kicker installation