Polaris RZR Forum - RZR Forums.net banner
1 - 15 of 15 Posts

· Premium Member
Joined
·
208 Posts
Discussion Starter · #1 ·
Hey everyone,

I thought it would be a good idea to keep the masses informed and post updates to our product line in this thread. We do offer discounts to forum members, so please take advantage of this when you call or checkout on our website! If you have an old set of MudBusters and would like the newest revision to your vehicle in HDPE, please contact us to get the best price possible.


We have recently modified the RZR-S and RZR-4 800 rear fenders by adding 3" to the rear, thus blocking a lot of debris from getting into the cargo area. So far, the feedback has been great!


We have added the RZR 570 to our product line with standard and extra coverage options (the extra coverage option is pictured)


The 2015-2016 Midsize Ranger kit is about to hit production in standard and extra coverage. These fenders provide amazing coverage under the hood and completely cover the underside of the dump bed.


The Yamaha Wolverine was added to our product line last month. It's obviously not a Polaris, but it's a very capable machine!


The Honda Pioneer 1000-5 is now available. I love this machine!


And the best selling units are listed below. The RZR-S 900/1000 (also fits the RZR-4 900)


Lastly, the RZR XP-1000 kit may be revised in the coming weeks (standard set is shown with the flat rear fender option)
 

· Addicted
Joined
·
3,728 Posts
Have anything for the Ranger 900xp ?
 

· Registered
Joined
·
56 Posts
I was looking at the website at the 800-s flares. It shows: "RZR-S Complete kit" and "RZR-S Complete kit with rear bends". Whats the difference between these options?
 

· Premium Member
Joined
·
208 Posts
Discussion Starter · #5 · (Edited)
I was looking at the website at the 800-s flares. It shows: "RZR-S Complete kit" and "RZR-S Complete kit with rear bends". Whats the difference between these options?
The standard kit comes with flat rear fenders. The rear fenders that have bends are pictured below. We basically crease the rear fender slightly on the outside edge during manufacturing to add a little style. Most of the kits we sell feature the rear bends. Most of our customers (and dealers) seem to prefer them over the flat fenders. Please let me know if you have any other questions. :)

 

· Registered
Joined
·
56 Posts
I was looking at the website at the 800-s flares. It shows: "RZR-S Complete kit" and "RZR-S Complete kit with rear bends". Whats the difference between these options?
The standard kit comes with flat rear fenders. The rear fenders that have bends are pictured below. We basically crease the rear fender slightly on the outside edge during manufacturing to add a little style. Most of the kits we sell feature the rear bends and our customers and dealers seem to prefer them over the flat fenders. Please let me know if you have any other questions. :)

Thanks. Looking to get a set ordered here shortly!
 

· Registered
Joined
·
32 Posts
You say that the XP1000 flares may be revised... I am looking at ordering a set right away, can you let me know if I should be holding off for a week or so if there will be a product update? You can PM me if needed as well.. thanks!
 

· Addicted
Joined
·
3,728 Posts
At what price point will the Ranger kit be? Can you buy the rear/bed only?
 

· Premium Member
Joined
·
208 Posts
Discussion Starter · #14 ·

· Premium Member
Joined
·
208 Posts
Discussion Starter · #15 ·
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top