Polaris RZR Forum - RZR Forums.net banner

1 - 7 of 7 Posts

·
Registered
Joined
·
3,934 Posts
Discussion Starter #1
I ordered a set of +2" Forward HD A-Arms online from the website. After three days I still had not received an email confirmation so I called them to check status. "They'll ship in a couple of days" was the response I got. I received them shortly after with no issue. They seem well made and no issues with the quality.

However, they do not have complete bushings, only a brass insert. In the description: "This kit includes all four a-arms with brass bushings and grease zerks already installed". This would lead one to believe it has bushings pre-installed. I called to inquire and got "You have to reuse your stock bushings". I explained I don't have the stock bushings and the description is misleading. The rep said it would check to see what they could do and call me right back, that was over a week ago.


I could really care less about $100 set of bushings but it's the lack of follow through. This is not the first time I've had issues with their customer service. I had to cancel a previous order after two weeks and no product or update. I called and was told "Call back later no one can help you right now"..."wrong answer just cancel my order".


As a business owner customer service is always #1 so at this point Zbroz will get no more business from me.....
 

·
Vendor
Joined
·
214 Posts
RZR_Joe, we are very sorry to hear about your Zbroz Racing order experience. We strive to offer excellent customer service! We are looking into the issues that you have addressed so that we can make the necessary adjustments.

When ordering online you should have received an email order confirmation immediately after placing your order through our automated website system and then you would have received an email notification when your order has shipped. We do try to ship as quickly as possible and most orders ship within 48 hours of when the order is placed.

As our +2 Forward A-Arm Kits for the 2017-2019 RZR XP Models include Brass Pivot Bushings pre-installed in our a-arms, but we do not include the ASM Pivot Caps or Shaft Pivot Pins. We are updating our website and instructions accordingly.

Once again please accept our apologies and please let us know if there is anything else we can do to resolve this for you.
 

·
Home of Ars FX & Exit
Joined
·
215 Posts
I think confusion happens quite often when terminology is not fully clear or understood. our arms do include and did include the bushing but not the pins or end caps that have the rubber o rings. Those are reused from stock arms. 14-16 RZR arms are different and the bushings come in and out easily. 17-19 arms have different style that is hard to remove and we felt supplying the arms with quality brass bushings was a major upgrade.

I have seen it with a racer here and there where they have confused what a bushing surface is and a pin and actually ran the arms with the caps installed but not the center pin. Needless to say the arm was a little loose but once installed just like stock arms with all the parts they work great.

So very sorry there was confusion on what was included and what was not. It has been updated on the website to help in the future.
 

·
Registered
Joined
·
3,934 Posts
Discussion Starter #6
As I said, I could care less about the bushings. It was the lack of response which has been typical of my experience with Zbros on multiple occasions.
 

·
Premium Member
Joined
·
375 Posts
I received a email yesterday informing me SXS Performance just shipped my fuel rail....2 weeks after I ordered it!
 
1 - 7 of 7 Posts
Top