[PhantomEWO]

New 2012 4 800 LE. After first 50 miles the plastic fender near right engine melted quite badly. Between the header pipes and the fender. Plastic fender is at least four inches away from pipes. Wasted most of day at the dealer while they did heat tests etc. No answer and no answers. I'm having doubts now. Anyone else have such a problem?
Thanks ... Don

 

[Wren]

My 09 is melted pretty bad...

 

[Doolin2]

Mine did it right away on my 2011 50"

Doug

 

[Clayton4971]

I took one from UTVinc that they use for the passenger side pop riveted an piece of angle aluminum added Thermo Tec and it seems to work good you can see the angle comes out to protect the fender

 

[hillhound]

mine done the same thing but it was covered under warnty

 

[medik418]

My '09 standard warped the right rear fender after I installed an exhaust pipe from a "S".

 

[cyclereckr]

Have had this problem with RZR4 LE. I double wrapped the exhaust with header wrap, fist with 1 over each pipe, second with two inch. Now I can ride all day and touch the pipr.