Polaris RZR Forum - RZR Forums.net banner

1 - 20 of 186 Posts

·
Vendor
Joined
·
4,174 Posts
Discussion Starter #1 (Edited)
Well, I have the Z1 conversion kit pretty much ready to sell now. Did one and now getting ready to work on one for the shop to have one to show people what their RZR can do with the 1100 twin cylinder Arctic Cat Z1 engine in the 800 RZR.

The first kit is for the 'DIY' guy. The kit has all the engine mounts, STM billet OD secondary clutch, HD snowmobile clutch belt, STM adjustable primary clutch kit for the Z1 cat clutch, and high volume in tank fuel pump. It is designed for the guy that can do all the wiring, plumbing, intercooler, and exhaust themself. This Z1-kit1 is $2565.

The second kit is for the guy that wants maximum potential for power. We provide all the first kit has and include a SS header that relocates the turbo to the middle, water to air intercooler kit which includes pump, hoses, fittings, heat exchanger, and intercooler, a short aluminum intake, 1 gallon oil tank that we make, and turbo oil and water line fittings. This Z1-kit2 is $2713 You can also upgrade to the Z1-kit2 later if you decide from the Z1-kit1.

I am working on an aluminum scatter shield that will mount to the aluminum engine/tranny plate now. I will then work on a removable water tight cover too.

You can contact us at 573-204-8296 for more information.

I have the Z1-kit1 in stock now.
 

Attachments

·
Vendor
Joined
·
4,174 Posts
Discussion Starter #3 (Edited)
Not right now. We are covered up. I have 2 custom coaches to build and lots of repair work on RVs. I. Need to hire more help. Hard to find good help in my area.
 

·
Vendor
Joined
·
4,174 Posts
Discussion Starter #5
Taking time this summer. Working on my RZR and my daughters getting reading to go do some racing!
 

·
Vendor
Joined
·
4,174 Posts
Discussion Starter #7
Will do. She wants to race the Z1 i am building. She can drive! Knows how to pick lines very well. I the the stock 800 is getting boring to her.
 

·
Registered
Joined
·
5,686 Posts
Not right now. We are covered up. I have 2 custom coaches to build and lots of repair work on RVs. I. Need to hire more help. Hard to find good help in my area.
Thats good to be busy. Just hopefully you have time to ride still. Lately the same has been for me...Not enough riding.
 

·
Just kidding!
Joined
·
10,725 Posts
Not right now. We are covered up. I have 2 custom coaches to build and lots of repair work on RVs. I. Need to hire more help. Hard to find good help in my area.
Thats good to be busy. Just hopefully you have time to ride still. Lately the same has been for me...Not enough riding.
If you got a rzr4 you could put this kit in, there is already another member doing it.
 

·
Vendor
Joined
·
4,174 Posts
Discussion Starter #12
I dont have a 4. Yes it would go right in it too.
 

·
Vendor
Joined
·
4,174 Posts
Discussion Starter #14
Thanks Jason B., how is yours doing now?
 

·
Registered
Joined
·
41,101 Posts
Well, I have the Z1 conversion kit pretty much ready to sell now. Did one and now getting ready to work on one for the shop to have one to show people what their RZR can do with the 1100 twin cylinder Arctic Cat Z1 engine in the 800 RZR.

The first kit is for the 'DIY' guy. The kit will have all the engine mounts, STM billet OD secondary clutch, HD Polaris clutch belt, STM adjustable primary clutch kit for the Z1 cat clutch. It is designed for the guy that can do all the wiring, plumbing, intercooler, and exhaust themself. This Z1-kit1 is $2295.

The second kit is for the guy that wants maximum potential for power. We provide all the first kit has and include a SS header that relocates the turbo to the middle, water to air intercooler kit which includes pump, hoses, fittings, heat exchanger, and intercooler, a short aluminum intake and 1 gallon oil tank that we make, price to be determined soon. You can also upgrade to the Z1-kit2 later if you decide from the Z1-kit1.

I am working on an aluminum scatter shield that will mount to the aluminum engine/tranny plate now. I will then work on a removeable water tight cover too.

You can contact us at 573-204-8296 for more information.

We are taking orders for the Z1-kit1 now.



That's Bad AZZ Jason... NICE...
 

·
Vendor
Joined
·
4,174 Posts
Discussion Starter #20 (Edited)
I have a few more Z1 kits in stock for anyone wanting something quick should be back from powder coat Friday. I am working on the install instructions for the kit now.

The first kit is for the 'DIY' guy. The kit will have all the engine mounts, STM billet OD secondary clutch, HD Polaris clutch belt, STM adjustable primary clutch kit for the Z1 cat clutch. It is designed for the guy that can do all the wiring, plumbing, intercooler, and exhaust themself. This Z1-kit1 is $2295.

I am getting close to putting the Z1 in one of my 800s and will post more pictures then.
 
1 - 20 of 186 Posts
Top