Joined
·
757 Posts
So today i decided to mount a 12" LED bar to the front of the XP4..
Basically this is what i came up with. Mounts to the (2) original bolt hole locations that i drilled out and added 5/16 nut-serts. 3/16 steel plate, cut on the waterjet and formed on the press brake.
![]()
![]()
![]()
![]()
If interested in the LED bars and/or mount, please let us know.
Basically this is what i came up with. Mounts to the (2) original bolt hole locations that i drilled out and added 5/16 nut-serts. 3/16 steel plate, cut on the waterjet and formed on the press brake.
If interested in the LED bars and/or mount, please let us know.
