[Rstenmark9478]

They should move significantly, not just a tiny bit. Inner should plunge in and out several inches, and the outer usually only about an inch. Mostly because the outer boot is shorter and tapered significantly.

Isn’t the bottom joint locked with a round clip on axle Should not move on outer joint. Top inside joint moves in and out to a point. They both can’t move. I don’t think. But im going off older machines. But I think I Mayb right. I’m guessing the bottom cv got pushed passed the clip. Should only b able to wiggle that one.

 

[Rstenmark9478]

The stock axle, only the inner joint plunges. I replaced it with a SuperATV rhino 2.0 and both joints plunge on that.

I guess bottom does move about an inch.