If you have not re-valved your shocks on the rear, go full hard and back off 4 clicks, fronts about 8 to 9 off hard.

 

I had all mine turned 8 in and I softened them all up 3 clicks out, start in the middle and ride it and tune it in. You can feel the difference much better with the Makin Trax springs, its so nice.

 

09 "S"
Just looking for a starting point for the clicker setting.

Low dez, Glamis riding.
250-rear 225 ft (0 preload)

Heavier rate spring, lighter damping?

If you have not re-valved your shocks on the rear, go full hard and back off 4 clicks, fronts about 8 to 9 off hard.

what kind of valving would you recomend, we dune in the winter months and trail summer months, i have your springs mentioned above

thanks

 

Thanks

 

09 "S"
Just looking for a starting point for the clicker setting.

Low dez, Glamis riding.
250-rear 225 ft (0 preload)

Heavier rate spring, lighter damping?

If you have not re-valved your shocks on the rear, go full hard and back off 4 clicks, fronts about 8 to 9 off hard.

what kind of valving would you recomend, we dune in the winter months and trail summer months, i have your springs mentioned above

thanks

Are you talking about re-valving or settings?

 

revalving

thanks