Pretty standard socket. I would check the "HELP" section at the local parts store.

 

You can order online from a Polaris dealer.

 

P/N 4011101, anywhere from $20-$30 EACH. One of those "how the hell does this stupid part cost this much" items. When I switched to rear LEDs, I constructed a removable system with a new wiring harness, etc. These were more expensive than any other part of the setup, including the wiring harness.

 

thats funny right there

 

thanks alot. i got rear ended the other day, and all it did was break one of the lock off of that peice some how.

 

I know this post is old, but I needed the same part today, both sockets broke off on my 08 after a rough weekend of riding. I found out that the socket from a 2001-2010 Ford Ranger front park light works. Only difference is the bulb sticks a little further into the housing, but it is still far enough from the lense not to melt it.
The rzr part number is 2u5a-13411-pb the ford part number is 2u5a-13411-sb. I work at an auto wrecker so got a couple for free.

 

Just got the Ford socket for my 2010 RZRs but the plug on my harness will not fit the socket so I will just order the factory one.

 

Duct tape works to. Mine has been duct taped for a yr. now. Even through pressure washing, still holding on strong.

sent from Droid charge