I use a 3/8 shackle and hook it on the solid round bar in front of the front dif:ride:

 

I've always wondered why the aftermarket hadn't addressed this somehow, without adding a whole new bumper Polaris sure didn't make it easy to access that point!
Just a bolt-on that is easier to get to when you really need it.

 

I agree! Other than that little round bar there is nothing to hook anything to:rm_thumbdown:

 

without a winch, they sell a front receiver hitch you could use.

i also use the little round bar in front of the front diff, and have the smallest D-ring i could find on it with a couple inch long strap connected to a hook. i use a bungee cord to hold it up out the mud when not in use.

 

i also use the little round bar in front of the front diff, and have the smallest D-ring i could find on it with a couple inch long strap connected to a hook. i use a bungee cord to hold it up out the mud when not in use.

Any idea what that small D-ring is rated for?

 

how about a picture? There has to be a better set up, course RZR's never get stuck.

 

The 3/8" shackle I use is rated for 2200#. Got it at my local industrial hardware store. Make sure to get a good one! There are a lot out there that are made of different metals and all are not rated the same!

 

Best place for a front tow hook is on a Rhino......

 

Yes, I agree and they have them! But I'm tired of having to get out and show those Whino owners where to hook to or use my winch when if I had my druthers’ I’d prefer to set in my seat and simply take they're picture standing in the muck!

 

 

What about mounting it down low where the bottom 2 front bumper bolts go?