Polaris RZR Forum - RZR Forums.net banner

Fourwerx Hoot scoop fitting issue

2417 Views 4 Replies 4 Participants Last post by  Mowershop
Spent about a half hour with a blade slowly trimming the stock center bumper cover and the carbon fiber scoop and this is about the best I can get it to fit. Still slightly buckled so the front 1/4 raises up slightly and wont lay down properly. Emailed Fourwerx a couple days ago and have not gotten any response. Not sure if I really should be having to trim either stock or the carbon fiber hood. Anyone else had fitment issues and have to do the same or was it just a simple drop in?
Automotive parking light Car Automotive tail & brake light Grille Automotive lighting

Grille Car Vehicle Automotive lighting Hood

Car Vehicle Grille Hood Automotive lighting

Car Automotive lighting Vehicle Automotive tire Hood
See less See more
1 - 2 of 5 Posts
Boy from your pics it looks like it fitting pretty good I offer this with no idea of how it should look on a rig like yours.
Should lay down flat on the widest part on the sides. Currently they are about 1inch from being flush.

Vehicle Car Hood Automotive lighting Motor vehicle
See less See more
1 - 2 of 5 Posts