The Turbo bezels (which have frogskin on both sides) are a direct swap and fit perfectly.

 

That is great news! Thanks for that, now to get some ordered up!

 

I just finished making some that go on the location you are describing. They definatly increased the airflow to the clutches and airbox. I also put a 4" fan going to my clutches and these helped to provide the extra airflow needed. They should be up on our website Moflowvents.com shortly.

 

You can get the Turbo bezels in a kit from Polaris, it’s not much over $100. They only give you thin adhesive backed weather stripping for the clutch side, I got some matching weather stripping (1/8” thick x 1/4” wide) from Amazon and sealed the engine side as well.