Polaris RZR Forum - RZR Forums.net banner

Does this sound like a CV popping out?

1202 Views 0 Replies 1 Participant Last post by  clemson726
A couple of months ago i put an aluminum sprague carrier in my rzr. On one of the cv axles the joint pulled loose inside the boot taking it off. I had to take the boot off to get it back in and put new clamps on. Ever since that day when i go over a water break or something of the sort, the front end pops and you can feel it. There is no cv bind at full droop and the axles seem tight. I cant find anything loose. Does what i'm describing sound like it could be a cv joint pulling out at full droop and popping back in when the suspension compresses? I do notice a little wiggle room in and out on both front axles.
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.