[barrybeaver]

in the last three month i have broking two inter rear cv bearings
both of them was in the mud and on the right side the 2nd one was a moster axle from the cvman
have a 2008 rzr with 2" lift, rzr s motor with a dirtydawg stage2 clutch kit :rollfinger:

 

[barrybeaver]

the pic was the first axle

 

[HawkEng]

Go with Turner Axles and you won't break them. Garranted for 1 year no cost replacement.

 

[barrybeaver]

where do i look fr a turner axles

 

[HawkEng]

turnercycles dot com

 

[gunrunner]

your 2'' lift is probably the cause, you can only lift a rzr 1.5'' before putting the cv joints in a bind. jack it up and check to see if the wheels will roll free when fully extended if they wont you will continue to break stuff no matter what brand you use. racer tech lift is the only one ive found that wont do it on a S model, roktek also works on a standard rzr without bind. all the ones that bolt to the bottom of the shocks will bind the cvs.

 

[barrybeaver]

that what i have is the one that bolts in the botton
going to order one these weekend and take off the lift
:rm_thumbdown::rm_thumbdown:

 

[crazywes]

that what i have is the one that bolts in the botton
going to order one these weekend and take off the lift
:rm_thumbdown::rm_thumbdown:

Been running highlifter 3" lift on '10 RZRs with 30" mud lites and no clutch kit. cant get them to break ,with stock axles ride it like i stole it with law on my back. really tho tires have a lot to do with it.hade to take sbacks off my xmr and run mud lites to keep from breaking axles all the time even tho it came stock from factory with sbacks

 

[barrybeaver]

i am runing on 26" terracross tires