[sunsrzr]

My S makes a clicking and popping sound when turning or hitting bumps. I think it is coming from the rear sway bar. I checked the tightness on the bolts and they didn't seem tight at all. Does anyone know how tight they should be? I turned them a half turn and it seems to have helped the issue, but I don't want them too tight.

 

[Chino]

My sway bar bolts loosened over time as well makin an annoying clicking sound. I torqued mine pretty good with some blue locktite to prevent if from happening again..

 

[sunsrzr]

Is there a torque setting? I didn't know if I would restrict movement if I went too tight.

 

[quadnkev]

It is sending a not so subtle message REMOVE THE SWAYBAR and you will live happily ever after.:rofl3:

 

[blazeman]

apply your brakes lightly see if it goes away , I have a anoying clicking sound also, but it goes away when I apply my brakes. sometimes it quits for awhile, sometimes it don't- that is after I let off the brakes. I think mine may be the brake pad...John

 

[sunsrzr]

Mine definitely quieted a lot after a half turn. I checked the pads already.

 

[johnnycat8]

apply your brakes lightly see if it goes away , I have a anoying clicking sound also, but it goes away when I apply my brakes. sometimes it quits for awhile, sometimes it don't- that is after I let off the brakes. I think mine may be the brake pad...John

you can adj the clearance on the brake pads....it's in the service manual

 

[Beach Leo]

Remove the sway bar...lotta guys claim better ride

 

[blazeman]

Thanks, John, I'll Give it a try...John

 

[scotty1111]

Blazeman, the rattling brake pads are an easy fix. It just takes an allen wrench and a little time like 5 minutes).

 

[RZR Jeff]

My sway bar bolts loosened over time as well makin an annoying clicking sound. I torqued mine pretty good with some blue locktite to prevent if from happening again..

I had the same thing. I kept looking for some loose gear in the bed. Then I grabbed the rollbar and rocked the RZR side to side. It was just loose swaybar bolts.

 

[Dingo]

I just posted on another thread, but Steve at Makkin Trax had me remove one swaybar link. Like Kev said, get rid of that thing, and be happy ever after! :ride: