I just purchased a used 2011 RZR XP 900 with 125 hours and 2000 miles. When I got home with it for the first time I drove it down the alley and then down the street. When I was driving down the street in High Gear, not going very fast I noticed a Clicking noise coming from the rear, I lightly tapped the brakes a few times and couldn't notice any change in the sound, its too hard to pin-point, you have to drive it faster than walking speed to get it to make the noise so being right behind it to hear where it is coming from isnt an option. I do not notice it as much when im in my gravel alley, and that may just be the fact that there is more road noise on the gravel than on the asphalt. Thank yall for any help yall have for me.
texan311
Mine has done it from day 1. It is a Walker Evans and I have bead locks on it. I got the beads centered as best I could and atribute the noise to shock valves clicking. Since the first warm up it has had this clicking from the rear. It is anoying as heck at times but when it is being used to potental I dont hear the clicking.
When it makes the noise slightly keep the brakes depressed to see if it stops or changes while still accerating. Your Pads may need to be adjusted as they will rattle/clunk after so many miles and need adjusted. Also check for loose bolts in that area (bumpers, exhaust etc.) to see if they are flopping around from vibration.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
