check engine error code 65590

Anybody ever have these codes 0 65590 and another code today 1 65591 and both code have 7 at the bottom of the display .

Time to pack that thing back up onto the trailer and back to the dealer.

Taj2010 said:

Anybody ever have these codes 0 65590 and another code today 1 65591 and both code have 7 at the bottom of the display .

Click to expand...

Did you find what these codes are? I just got the same ones on my rzr.

I got the same error code this weekend and don't see it in any of the charts.65590 and 65592.

keith stone said:

I got the same error code this weekend and don't see it in any of the charts.65590 and 65592.

Click to expand...

I have heard these codes are from the polaris recall update. Misfire codes or something. Maybe there is a recall for the recall.

Talked to the dealer today and he said 65590 is a misfire code 65591 is misfire cylinder 1 and 65592 is cylinder 2.

keith stone said:

Talked to the dealer today and he said 65590 is a misfire code 65591 is misfire cylinder 1 and 65592 is cylinder 2.

Click to expand...

Did they say why they came on or how to clear them? I just had my recalls done and drove it around the block and got both codes, I will be calling the dealer on Monday. There was nothing wrong with my rzr and now I have this done and I have 2 codes :sad:

I was told to check my belt and change my spark plugs. The alarm will clear once the motor runs an certain amount of revolution without detecting a misfire.

Same codes. Did the spark plugs and belt fix the issue? (I am really struggling to buy into this as I have a new belt and cannot imagine the plugs are bad already.)

It corrected my problem. I did notice a flat spot on my belt.

keith stone said:

It corrected my problem. I did notice a flat spot on my belt.

Click to expand...

Wow! So anytime a belt slips we are to expect the machine to nearly shut down and pop an error code? This could be dangerous given the right situation.
Dang, there must be a way to stop a slipping belt from doimg this...

I got the codes and changed the spark plugs and no more codes so far .

Anymore info on these codes. My buddy is in Glamis on his first trip out on his new 1000 turbo. He said plugs are brand new and. Belt. Like 2 miles on it

Anyone figure this out? Getting these codes. Checked my belt and it looks great. I also struggle to think the plugs can go bad so fast.

CaptainYARRR said:

Anyone figure this out? Getting these codes. Checked my belt and it looks great. I also struggle to think the plugs can go bad so fast.

Click to expand...

Sounds like the fuel pump

In my case, getting the code intermittently. It will appear for a little while then clear out as I ride. Then comes back at some point.

What makes you think fuel pump? Not having any starting or performance issues.

Same codes on my 2017 highlifter on my 2nd ride, never had any of these codes on my other machine 2016 XC. Any info on this would be great. Not buying into bad plugs or belt now that I see this issue on other machines.

Yep my did the same
I was running in low through deep sand doing about 35 and the check engine light came on

Change your belt!!! Happened to me after recall, dealer changed belt went away. Happened to buddy over Halloween in Glamis, took into camp rzr they changed belt all good. This past week 2 new turbos in Glamis, same codes changed belt and all is good. Not sure whats up but if belt has any glazing at all it throws code and goes into limp mode.