After time & $$$, a work in progress

Okay, here's the pic's. I got ahead of myself on the last one and didn't add them. The guy in the first 2 pics is my buddy Mike that I ride with. The third pic you can see the custom dash I did. Pic 4 is the set up I ride with. My gun boot isn't on it yet. I cut down a gun boot so it fits straight across the back in a Kolpin mount & stays behind the cage for protection. Pic 5 I painted the stock hood and UtvTech grills and just to go that little bit extra, left a green piece behind the logo. And a set of Lightforce HID lights.

I mounted my winch rocker switch near the the shifter and added a hydrolic park brake. mounted my wireless winch remote for easy access. A (push to activate) Led dome light and a snorkel kit I made with a little help from the forum.

Here's my modified gun boot. I don't like the Polaris factory set up for a couple reasons. So, after much searching for what I wanted, I had to resort to making it. The main reason I did this, was to keep the boot fully protected behind the cage, as I ride some tight trails in the mountains. I took a cheap gun boot from Walmart and cut it up and put it back together much shorter than when it started. To clean up the look I painted it with truck bedliner. I have a Kolpin Bootector to mount it behind the cage on the cross bar. I took one of the pic's with a tape measure and my Remington 700VTR .308 for perspective. The 3rd pic shows where the cuts where made & where it was reassembled. The 4th is the original gunboot for comparison.

Here's what you can see of my home made snorkels. To finish them off I coated them in a spray on bed liner. Used the mesh off an old Bobcat air filter to stop crap from going down them. On the two intakes I used water resistant prefilter material held in by a couple rings of abs pipe. This set up works great except I need to extend the clutch exhaust tube. It gets a little loud when I put my cargo box in the back, as it echos off of it. once I chop the cage the exhaust tube will be extended to the roof.

There's no Dr. Chop in the Yukon. So I chopped 4.5" out of my cage, last night (till 2am), all by myself. Just like a big boy.:icon_rockwoot:

Ever wonder what to do with those plastic bases after you put in UTVCrap lowering bases?.... I bought a new latch and mounted a box for extra gear when hunting or riding solo. you could also do this with a cooler or other things. 4 X bolts/locking nuts, 8 X large washers and a little time. I also add a seal to the box for dust & water.