Polaris RZR Forum - RZR Forums.net banner
1 - 4 of 4 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hi All, this one is a pidlly thing but noticed that there is no slider on the passenger side of a two-seater. I dug a bit more and it looks like the passenger and driver seat are attached via a single frame. :(

Of course, the 4-seater has dual slides for passenger and driver. Has anyone made the change, or was this a running change from Polaris to save cost for later machines?

Thanks
-Derrick
 

·
Vendor
Joined
·
940 Posts
Yes you can make the passenger seat a slider. You should be able to tell what parts are different/missing from the passenger seat from the Polaris parts break down on RMATV's or Partzilla's web sites. I know you need the slider plate and the screws with the shoulders but can't remember if there is anything else off the top of my head. If you get the parts list, I can order them for you, probably save you shipping at least.
 

·
Registered
2020 900 Trail Fox Edition
Joined
·
202 Posts
Its a very easy DIY project to convert the passenger seat to a slider like the drivers. I bought the parts from the local Polaris dealer ans installed it in around 20 min.
 
1 - 4 of 4 Posts
Top