[cmcdaniel]

Hey guys,

I just bought another 08' Std RZR and wanted to update the stock intake. I pulled the stock intake off my 2010 RZR 4 for a UMP. I was thinking the 2010 stocker would be better than the 08' stocker and it should work, does anyone know if it will fit for sure?

I'm also going to put the RZR 4 exhaust on the Std RZR as well, I hear that will work for sure, has anyone done that as well?

 

[Stumpduster]

Just to gain a third clip on the filter cover? Will you need to buy the new style boot that connects to the throttlebody?
As for the exhaust, mine came off a 4 and mounted right up!

 

[cmcdaniel]

Just to gain a third clip on the filter cover? Will you need to buy the new style boot that connects to the throttlebody?
As for the exhaust, mine came off a 4 and mounted right up!

I guess so, the 2010s are much cleaner after a ride. The 08's engines were doomed becuase of the original intake. I figured the 10' stocker is sitting around, why not put it on? I wouldn't go out and buy one.

 

[cmcdaniel]

Just to gain a third clip on the filter cover? Will you need to buy the new style boot that connects to the throttlebody?
As for the exhaust, mine came off a 4 and mounted right up!

Did you notice any difference with the S exhaust?

 

[Stumpduster]

Slight if any, has a different sound to it. Switched mostly because the Y pipe was shot and seemed to always collect stuff and burn. With a hole in that pipe and some baked on crud, I looked like I was driving a sparkler around at night.

 

[cmcdaniel]

Slight if any, has a different sound to it. Switched mostly because the Y pipe was shot and seemed to always collect stuff and burn. With a hole in that pipe and some baked on crud, I looked like I was driving a sparkler around at night.

Yeah, I hear those Y pipes crack too.