Search Results for ‘xp4 1000’

Ok, I can’t find the answer to this for the life of me. I’ve got a ‘21 XP 4 1000 Turbo (not an S) and am looking to finally swap out the factory cage. I found a sweet deal on a cage from a ‘17 XP 4 1000. Will a cage from ‘17 fit on a ‘21? I feel like they changed the specs in 2019, but can’t...

Hi all! I am new to the forum, so I will apologize in advance if this is posted in the wrong place. I recently purchased a 2014 Polaris RZR XP4 1000 as our first side by side. I have had it out about 4 times now and am starting to go through it and figure out what needs to be rebuilt/replaced...

Looking to buy the driver side upper and lower control arm for a 2018 XP4 1000 in Arizona ASAP

New to UTV's - bought our RZR about a year ago. Found some KRX wheels locally (15" with beadlocks) and bought them hoping to put them on our machine...they do not mount up properly. Bolt pattern matches but very little stud comes through as backplate doesn't line up flush. Has anyone come across...

Alright here we go. 4K mile 2017 xp4. Was starting to have diff clutch issues while trying to work that out was getting the misfire codes. It then started to slowly get really hard to start amd sometimes no start at all. Would crank and turn over but would have to give a lot of gas to maybe fire...

What’s up y’all my RZR won’t stay on, or go over 20mph and is high reving. Anyone have this problem before? If so what was it? Thanks...

Hello everybody. So I’ve been researching for about 6 months now for a beadlock wheel and tire combo to run on my ‘19 xp4 turbo. I originally wanted to run a 4+3 with 30x10x15. After researching this set up, I came across an article fromShock Therapy (highly rated suspension shop out of...

Hey guys newer member here 1st time SXS owner, so I bought a whip light and tried wiring it in to the ACC post under the hood and no matter what I do the 15Amp Term fuse (empty slot) blows as soon as I turn the key what am I doing wrong?? Wouldn’t the ACC fuse blow first? Also the inline 30amp...

Assault Industries is having a closeout sale! If you've recently bent your puny stock radius rods, then we've got some good news for you! We are discounting a special limited run of Xp1000 radius rods anodized in gun metal grey! You'll never bend a rod again. Also, our Hellfire front and rear...

I have a new complete set of Super ATV Hi Clearance radius rods...never installed. Bought for my 2015 XP4 1000, fits 2 seater as well. I went a different direction after purchasing. I will powder coat them any standard color for free, with purchase $200 will ship lower 48 accept PayPal...

Ball Joint snap rings keep bending / falling off I've had snap rings on 2 ball joints bend and allow the ball joint to pop up/out of the A-arm (after a reasonably hard bump). Is this common/normal/expected? I suppose it's possible that I installed incorrectly, but I doubt it since the clip...

Who is the best clutch guy in Southern California? I want to get Dalton clutch kit dialed in for racing. Xp 4 1000 Naturally aspirated Lonestar Long Travel 30inch ITP ultracross

I am trying to build my rzr for some desert racing here un baja. Last week I installed Lonestar long travel suspension, fox inernal bypass shocks and 30 inch ITP ultracross tires. I took it out this weekend for the first time and it felt ver slow. I was getting beat by a 900!! What should be my...

I have a 2016 xp4 1000 with a soft top and a full windshield. I'm trying to mount a 30" curved light bar on top. Has anybody have a way of doing this without putting holes in the top.

I want a SCORE approved cage. How much will I be spending? Just a beginner but I live in Baja and would love to run in SCORe 500. i have a 2015 xp4 1000 So far I have two light bars 40" and 10" LSR long travel Fox internal bypass Intercom ITP ultracross Method beadlocks And a few other things...

My buddies company is hooking me up with a free gps unit of my choice. Whats the best system for running baja?

I just staryed building out my 2015 rzr xp4 1000 for desert racing. I live in baja. I am only doing mostly suspension mods long travel from lonestar, fox internal bypass etc. No engine, exhaust or other mods besides a clutch kit for bigger tires. Most amateur races I am entering are a minimum...

Does any one have any real world experience with this lift? We ride in a lot of different terrain from mountains, to snow to Moab to the sand dunes. Just trying to figure out how they ride and handle with this lift and i would like to run the 36 Terminators. (not in the sand though) lol Is the...

Front shocks for sale. In good working condition. Shocks have 580 miles on them. Prefer So. Cal pick up, but will certainly entertain shipping as well. $525 or best offer. PM, Email or Text. Thanks Mike 951-236-9061 [email protected]