Search Results for ‘rzr 800’

4XAVH76A*EF 2014 Rzr 800 two door I looked up steering gear and found part#1823497. purchased an aftermarket gear and it has tie rod tubes that thread onto inner tie rods and each side is approx. 5" too long. The original gear only has one-piece inner tie rod and outer threads on. ,I've looked...

Just bought a few months ago 08 800 rzr. Down in South Florida there's a lot of mud and my issue is the water. Right now the machine is pretty much stock with the 2" lift adjustment Tabs. Any water that is up to my tires the machine will start to sputter. After yesterday's ride washing it...

To be precise, I am joining from Edwardsville, IL - so thanks for having me as a member. I have owned ATVs and motorcycles for most of my life, but am new to UTVs. I recently purchased a used 2011 RZR 800 EFI with ~3,500 miles on it. It was in okay shape, but it needed some TLC to bring it up...

I have a 2008 rzr 800 and I know they made a upgraded hub kit for the front and the part number is 2204717 which I believe is a different bearing size since their was a flaw with the oem one. I also believe it may be aluminum I just ordered two but wanted to get the matching upgrade for the...

I just had my pinion nut changed at the Polaris dealer on my 08 polaris rzr 800s . Everything I’ve read says it needs to be torqued to 250-300 lbs . The dealer torqued it to 80lbs . Can anyone confirm 80lbs is factory spec as he stated ? Thanks

Okay guys I have a new to me 09 and 14 rzr 800s. I have did loads of research but do not want to throw parts at it without trying to diagnos the problem. The problem i am having with 09 is the motor starts and runs great It gets up to operating temperature an still runs good without any issues...

Okay so I feel like I've tried everything. It will start sometimes usually after 3-4 tries. It makes a weird clicking maybe winding noise but doesn't start. I tested the battery and it was bad - New Battery Still same issues I replaced the starter Still same issues Today I replaced the...

I have a (new to me) 2012 rzr 4 800 Robbie gordon edition. I recently traded my 2014 rzr 800XC for this machine and have some questions for those who know about running the power commander tuners on them. I have zero experience with these tuner boxes. RZR has a trinity stage 5 slip on exhaust...

Just curious to see if anyone has done a swap of putting either the 900 xp or the 1k xp trailing arms on the rear of a rzr 800. Thinking about attempting it I think it would be simple enough if I could get a good mount on the frame. Let me know any thoughts y'all have.

My 2012 rzr 800 saying it’s over heating, if not ran for awhile it starts up just fine and runs fine fan kicks one and everything but says it over heating around 240 I’ll shut it off and go to start it again and it doesn’t wanna start anybody have an idea what’s going on? (Yes there is coolant...

Alrighty, So I have bought a third hand or better 2009 Rzr 800 and it has an Xtreme Manufacturing long arm kit on it. That company has since stopped producing the kit (I have already reached out to ask for specs and or parts and they said no to both) and my poly bushings are starting to wear...

I bought a rzr 800 a couple weeks ago and finally got time to take it out! As I was riding around the rzr died after being on it for over 2 hours! I have checked the battery and also found a gas leak which has been fixed! But the rzr won’t start up! It would turn over but after a while of...

Hey y’all, first post here just looking for some help, I recently rebuilt my 08 RZR engine, replaced the crank, did new pistons rings and cylinders, as well as water pump kit, once I got it all back together and installed in the machine, I tried to crank it and it won’t fire, it seems to me that...

Hi there. Recently I’ve noticed valve cover breather leakage on my rzr. Removed it and saw that it was placed on sealant. I guess new sealant then install it and the problem should disappear. What do you think? Know nothing about sealants that are acceptable to use on engine. And...

Just want to figure out how harmful it’s for old rzr 2008 to hold high RPMs and starting abruptly? Like this way of riding but don’t want to have a problems after each ride. So what RPMs are acceptable to hold?

Hi everyone. Does anybody know is there an oil pressure sensor in rzr 800 2008? If the pressure is abnormal will the utv engine stall?

Looking for anyone who has tuned these 800 rzr motors for boost. 2014 rzr 800 S, turbo off of a 2019 turbo S, Canam X3 intercooler. AFR gauge installed with a PV3 tuner using the power core software to tune. This is my first time ever doing any kind of tuning. Been doing alot of reading on...

I have a 2009 ranger rzr 800. Looking to do a 800s conversion. Looking for all parts to do so. If u have the fox shocks, that will help too. Thanks and help appreciated.

Selling complete set of Bandit 50" Trail shocks for RZR 570 / 800. Purchased in early 2020 and had on RZR 570 for one season (<500 miles), all are in very good condition. These shocks & springs will make your RZR handle and ride better than it did when new. Haveupgraded RZR's so selling my 570...

RZR 800 S Frame Chassis from 2014 On Ebay Price:$674.95 https://www.ebay.com/itm/RZR-800-S-Frame-Chassis-from-2014-Polaris-PARTS/333687497888?