Search Results for ‘clutch’

Bought this machine off the showroom floor and from day 1 we noticed that there was a loud banging when the clutch would engage. It didnt seem normal to me as I never here that on my sleds but was not sure. Took it to the dealer and they said everything was normal but I just find it hard to...

Hello, I've searched around but nothing solving my issue. I have an 2019 xp4 1000 I installed a high gear reduction kit from roughly 12:1 (stock) to 8:1 (high gear kit) Installed on rzr: -aftermarket wheels and tires (30in tires) -aftermarket cage -stereo -superatv high clearance trailing...

Hey y'all, In the center console of my new pro xp was a bag containing a few basic tools that look to be clutch related, and within a black pouch are 3 clutch arms. Is it normal to provide spare clutch arms? Or did they replace/upgrade them? They did install 33's on the machine for a better...

Looking for aftermarket clutches Primary and secondary for my XPT 2016! I’m running 30’ tires. any Ideas ? Any reviews on stm stage 3 or super ATV rev 1 ?

I have a 2019 Polaris rzr xp4 1000. When I accelerate and run wide open it runs fine. When I let off the accelerator, it slams down too fast to low causing hard repetitive jerks. What’s the problem and any easy fix?

Hi, I have a question about engine revving. In idle is around 1100 which is fine, when I push it does 6x00 and this is fine in my eyes as well. The clutch engages around 2000 (little jerky if I may say) The thing is though that I hate when normally cruising around is revving between 4000 and...

My 2019 Rzr Turbo S primary clutch squeals like a pig at idle, and then once I give it gas and reach about 5-10mph it goes away. I have read all the articles on here (I think) about others with this issue. The main difference between my issue and other issues is that the other folks I have found...

Hoping someone can help. I have a 2014 900xp and here recently it will just cut off when I come to a stop sometimes. It will start back up no problem whatsoever but sometimes will shut off as soon as I put it into gear. Any thoughts on what the problem might be?

Hey guys clutch noob here and need some help I have 28 - 10 -14 pro armor crawler xr’s (32lbs) on sti beadlocks on my 2012 900xp. Total weight is 48 lbs. this is on a stock clutch which seems to be fine so far… under 50 kms. Used to have a bmp stage 2 clutch kit but helix and weights were...

Hello all, 2015 rzr 900. Anyone ever try to replace the secondary clutch outer rollers without removing the spring? Is this possible? Mine are shot. Wanted to ask before buying the spring compression tool. Thanks...

So hi, I’m a new poster and a new rzr owner. I might have a secondary clutch problem. On my 2013 jagged x rzr I looked at the clutch because it seemed like I blew a belt, but found the secondary sheaves separated and belt hanging loose. is the bearing just pressed into the aluminum and then it...

Anyone have any experience with mother clutcher replacement clutches? Prices seem to be crazy right now around $1000 for a new secondary. Found brand new primary and secondary for around $800 on ebay motors. Here’s the link. 2011-2014 POLARIS RZR 900 XP - NEW PRIMARY & SECONDARY DRIVE CLUTCH...

Anyone have any experience with mother clutcher replacement clutches? Prices seem to be crazy right now around $1000 for a new secondary. Found brand new primary and secondary for around $800 on ebay motors. Here’s the link. 2011-2014 POLARIS RZR 900 XP - NEW PRIMARY & SECONDARY DRIVE CLUTCH...

Hello new to the forum . I'm from the UK and have a rzr xp pro 2020. There isn't much information or support over hear so hopefully you lot can help. It's got a assassin clutch in it at the moment. I'm finding when I'm on the fast section so flat out it gets to a certain speed and it's like the...

Just past a milestone and absolutely destroyed my first belt 👍🏻 Had to throw on a spare before driving it home. So I pulled my belt back off and spun the secondary clutch. There is a clinking as it spins. Sounds like something is loose inside maybe. Anybody have any ideas on what this could be...

Hey y’all! we were on a ride a couple weekends ago when our rzr starting popping out of gears. We adjusted the cable last weekend and we’re able to go in high and reverse but no low! Has anyone had this problem? We are at a loss.

I have a 2015 rzr 900s that I messed up the primary clutch in, I would rather replace it with a built clutch do to my 37 in tires, I have a friend with a 2012 900xp built clutch he will give me I’m just wondering if it will work for me

1,500 takes the lot O.B.O. No trades, not selling individually, CASH ONLY Located in central CA 1 set of 2016 lime squeeze trailing arms 2017 turbo tie rods and 2016 xp tie rods 2 sets of xp 1k radius rods, 1 set of turbo radius rods Used 2016 lime squeeze upper and lower a arms, new set of...

I have a '17 900xc on 27" tires, I'm going to be getting the "S" package upgrade from superatv 55" wide to about 62" and I'd like to up my tires to 32". Is there a specific clutch kit I need to get or doesn't matter.

2011 800 EFI Max speed at full throttle is 45 mph. Max rpm at that speed is 5750 rpm. Low range can wind up to 6400 rpm. Engine is solid (fuel press, compression, air, etc). Tires: 26x9, 26x11 Maxxis New springs in both clutches My clutch is not "down shifting" properly when I hit the throttle...