Hey new to the forum but not to the sport

Anybody running the wheels or their beadlocks on a set of wheels? Out here in Ky we run washouts,rocky trails and lower tire pressure is a must.
My question is how they holding up as far air leakage,strength. Ive got trailready beadlocks on rockcrawler and trailready hasnt released their beadlock wheels yet.

Were u at in KY Im in Mayfield 25 miles south of Paducah. We are all going to Windrock labor day weekend to ride and camp for four days.Three rhinos and 1 rzr.More than welcome to hook up with us just beer,buddies, and bullshiting.

Im in winchester which is on the other side of lexington we are going to Harlan, KY labor day weekend. I apreciate the offer though we to like to drink the brews along with the bullshit

__________________
2003 chevy 2500 DMAX
2004 YAMAHA BANSHEE
87 SAMURAI ON 2.7L 42",60'S,4 LINKED 101"
08 RAZR STOCK AS OF NOW

ONE ROCK AT A TIME...DAMN IT

zuk_freak I am in Morgan Co. We ride a lot in the magoffin, morgan, breathitt among other areas. How is the riding in Winchester? I have never rode in that area.

Have had several sets of OMF's. Running a set now on the RZR and they are holding up great, no leaks no breaks! They are heavy but built solid. Mine are on ITP 108's. If you call OMF, talk to Bones, he is great to work with and will hook you up with a great deal.

Chaser we dont have much in winchester so trail on over to Irvine and Slade, KY thats the closest for me.

Desertsportsman those look great what backspacing did you get and what your width front and rear with those and last but not least can you take pix from back

Thanks Thomas

We've broke ITP Beadlocks wheels Like Glass (112's). The only wheel I have found to hold up to hardcore racing is the Douglas Rock Star and OMF Bead locks combo...I am sure the higher ups on this supposedley informative Forum will delete this post as they do just about all factual manufacture post...Hope you see this.

Yeah georgia ive seen the breaks in person myself. Ive not been impressed with some of ITP wheels as far as strength goes. I trashed a new 650 prarie few years back due to em, The wheel bead ring just flew off. Some of the older designs were not much if you like to ride hard.
By the way what backspacing are you running on those rockstars?

5-2 front 5-3 rear. ITP does have a lifetime warranty on the cast wheels. Check with OMF to see if they honor breaks. Zuk. Have a few pics from a long time ago....

I am from Winchester too, and I have a stock 08 RZR. I just rode up at Clay City last weekend.

Mine are 4-3 all the way around with Fireball Hubs...

This it what happened to our set two laps into a race...

Yea ITP warrantied them but that didnt help my DNF....They bling, but they aint no race wheel..
Cast wheels are for Go carts...

Desertman those are sweet pix i dig the width thats what im shooting for come this fall im going tear mine down and put LT kit on mine, Im tired of rolling. By the looks of it thats a LSR kit and Elkas what spring rates are you running and how do you like the kit so far.

Georgia thats a bummer on the DNQ. My break was to the outer ring that holds the tire from coming off rim.

Mastin

What did think of the clay city ride i got bored after a hour or 2. I used to ride dirt bikes there alot. Was in a couple atv scrambles they had about 10 yr ago. Havent been back since