Johnny,

You have some parts here ready to pick up! I think they are RZR gusset kits?

G-

__________________
Lone Star Racing

I just got mine in today is there any need to paint them or anything just wondering about them rusting.

I lust paint the ends where they stick out

__________________
www.utvcrap.com 623-934-3070

623.934.3070

www.UTVCRAP.com, Rhino Crap, RZR Crap, RhinoCrap.com & RZRCrap.com are in no way, shape, or form affiliated with the Yamaha Motor Company, Polaris Industries or Kawasaki. We are not a direct Yamaha, Kawasaki, Polaris Dealer or Distributor - We merely sell crap for a Yamaha Rhino, Polaris RZR and Ranger and Kawasaki Teryx.

In stock again

............

lift it up and with a 3/8 socket you can remore the factory skid plates installing you front tubes. on the rear instead of fighting my brake line bolts I just slid in nice and smooth until I reached the bolt and WHAM with a hammer quick hard and fast, brake line still bolted in tapped gently in to place and put a few welds on everything to keep in place. piece of cake.

just hope your factory skid isnt destroyed like mine was....and as far as bolts.....i got two out with a socket,,,,the rest snapped and out came the drill.....

__________________
hc pistons,port work,valves, springs,guides,clutch kit,bored throttle body, pushrods,cam,and oil cooler from hpd,maier hood,black t-7 w/red beadlocks,maxxis 4-speeds,mb cage,LTE SINGLE, dragonfire brace and airbox,lonestar brace and gussets,utvcrap tubes,pro ALUM bumper,emp and polaris skids,crow 4point and body dipped red/black marble,power commander,hotride ecu,custom gusseting,shawz panels and +4 with fox shocks,billet handle,cupholders,speedo,rails,cap,shifter,beard super tz seats

Just ordered a set through your website. Thanks, Larry

Johnny or Nick, do you have these in stock and what is the price on them?

have plenty in stock 49.95

__________________

4244 W Dunlap Ave // Phx, AZ 85051
Ph. 623.934.3070 // Fax 623.934.043

sounds like i better get a set also !!!

__________________
Polaris RZR - build date - 6-15-2007 - Black ITP True Beadlock Wheels with Polished Rings.26"- 6x9x14 front, 6x11x14 Maxxis Bighorn Tires rear, 1.5” adapters - total width in rear of 63"

You still have some? What's the shipping to Canada?

Thanks

__________________

Hey Johnny,

I just ordered those tubes online from you I noticed another frame gusset kit, where does that go and what is it for.

I normally don’t jump my RZR but my Teenagers drive it sometimes so need I say more – also I ride hard in the Desert and fast and do get little air on fire roads just because I am clicking along at 45- 55 miles an hour.

So the question is do I need it ? and how many pieces are there ? and where do they go ?, and do you have pics. ? OK so there are 4 questions

Some Gussets Support The A-arm And Some Support The Shock Tower, Just Depending On Where You Are Wanting The Most Strength