i want some do you paypal? mine is down to bare frame so now would be perfect...

__________________
hc pistons,port work,valves, springs,guides,clutch kit,bored throttle body, pushrods,cam,and oil cooler from hpd,maier hood,black t-7 w/red beadlocks,maxxis 4-speeds,mb cage,LTE SINGLE, dragonfire brace and airbox,lonestar brace and gussets,utvcrap tubes,pro ALUM bumper,emp and polaris skids,crow 4point and body dipped red/black marble,power commander,hotride ecu,custom gusseting,shawz panels and +4 with fox shocks,billet handle,cupholders,speedo,rails,cap,shifter,beard super tz seats

what about something to support at shock mount front and rear and a-arm mounts....planning on getting a little air and hear these are weak points....running stock arms and wers from polaris

Johnny,
I called shop about tubes, and they did not know about tubes yet. I gave my name and #, but please make sure to put my name on a set on your end.
Thanks,
Jason.

__________________
HPD:pistons, push rods, head, valves,bush. kit, T.B.. D.F.:pipe, fuel con., belt, harness. super tip clutch. MPI: ECU. Wide band o/2. UTV CRAP: water temp, gusset tubes. T.C.B.: Cage w/ doors & roof. Edge camera: Ralley Cam. Holtz: skid plate, chassis plate,Vents. Mafia Ind.: +6'' L.T. w/ rad flow & Noleen shocks. Gear One Rack. SRT Beadlocks w/ Good Year. Amsoil: intake filter, oil filter. Optima Y., FST hubs, HIDs.

Johnny,
I got a call back, I ordered my set, thanks...
Jason.

Ok since everybody wants the two top tubes also for the rear they are now part of the kit the new price is 42.00 for the kit and it now comes with two 11 1/4 in long tubes for the top rear and you only need to remove the 4 torx bolts and the rear plastic to install them

__________________
www.utvcrap.com 623-934-3070

623.934.3070

www.UTVCRAP.com, Rhino Crap, RZR Crap, RhinoCrap.com & RZRCrap.com are in no way, shape, or form affiliated with the Yamaha Motor Company, Polaris Industries or Kawasaki. We are not a direct Yamaha, Kawasaki, Polaris Dealer or Distributor - We merely sell crap for a Yamaha Rhino, Polaris RZR and Ranger and Kawasaki Teryx.

Do they come cut to length so they can be just welded in?

__________________
2006 Silverado 2500HD Custom Truck
2007 Weekend Warrior FSW3200
2008 Ranger RZR 800 EFI (w/kids rear bench seat!)
2006 Honda CRF 450X (Set up for a BigPig!)
2001 ETON 50 ATV (Taylor Made!!)
Coming Soon (Something for KatieBugs!)

yes sir and most of the time you have to tap them in with the hammer and if you cant weld you could do a self tapper screw in each one

Johnny,
I want upper's too... If they did not go out yet add them to my order.
Thanks,
Jason

yes I already cut a set for you ....I was going to ship them either way

I'd get them for the rear, but I think it's too late for my front end. My front tubes already have dents and bends in them from before I had my aluminum skids. I doubt I'd be able to get them in.

Rhino Bob if it was mine you see how easy they bend I would install them with a big hammer and a piece of hard wood so you dont smash the end of the tube

rhino bob,id bet if you rounded off the leading edge of the tube to be inserted,and then used a torch to heat you stock tubes they would pound rite on in there,unless your tubes a kinked like mine were

Jason,

Your Order Is Long Gone, But We Will Ship To Two Top Tubes Out Begining Of The Week!

__________________

4244 W Dunlap Ave // Phx, AZ 85051
Ph. 623.934.3070 // Fax 623.934.043

Best way to order these is to call what phone number? I'll do so Monday.

Ohh and I was wondering what else do you guys gusset or add metal to on your LT RZRs? Shock towers? A-Arm mounts? Anything else? Are you going to sell a gusset kit?

Thanks, John

Johnny,
Thanks for staying on top of it for me! Liking the service, especially on such small items...

Thanks,
Jason