This is a discussion on ProCharger Air To Water 10 PSI Build within the TAGTEAM forums, part of the Supporting Vendors category; ProCharger 10 PSI SuperCharger With Water To Air Inter Cooler 2) CP 9:1 SuperCharger Pistons Race Coated 3) BeeHive Valve Spring Kit 4) SuperCharger Cams ...
|
|||||||
| Register | Home | Forum | Active Topics | Photos | Clubs | Garage | Members List | Social Groups | Search | Today's Posts | Mark Forums Read |
TAGTEAM 
TAGTEAM - Prescott, AZ - 928-273-4249 |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#31
March 29th, 2012, 07:40 PM
|
||||
|
||||
|
Re: ProCharger Air To Water 10 PSI Build
ProCharger 10 PSI SuperCharger With Water To Air Inter Cooler
2) CP 9:1 SuperCharger Pistons Race Coated 3) BeeHive Valve Spring Kit 4) SuperCharger Cams 5) CNC'd Ported Head With 5 Angle Valve Job 6) DLC Shim Buckets 7) Alba Slip-On Exhaust 8) Carrillo Rods 9) Cometic Gasket Kit 10) PC V With Auto Tune 11) Auto Meter C2 AFR Gauge (received from UTVINC 3/27/12) 12) Auto Meter C2 Boost Gauge (received from UTVINC 3/27/12) 13) Auto Meter C2 Oil Pressure Gauge (received from UTVINC 3/27/12) 14) Auto Meter C2 Water Temp Gauge (received from UTVINC 3/27/12) 15) Auto Meter C2 Volt Gauge (received from UTVINC 3/27/12) 16) KING SHOCKS (received from Racer Tech 3/28/12) Installed the front KING SHOCKS after the UPS man delivered them at 8:00PM tonight (3/28/12)... Nate installed the rear KING SHOCKS tonight (3/29/12)... 
__________________
timaz@cableone.net 928-273-4249 Last edited by swingarm1; April 4th, 2012 at 10:14 AM. 
|
| Sponsored Links | ||
|
RZRForums.net is the premier Polaris RZR Forum on the internet. Registered Users do not see these ads. Please Register - It's Free! |
|
#32
March 29th, 2012, 07:56 PM
|
||||
|
||||
|
Re: ProCharger Air To Water 10 PSI Build
ProCharger 10 PSI SuperCharger With Water To Air Inter Cooler
2) CP 9:1 SuperCharger Pistons Race Coated 3) BeeHive Valve Spring Kit 4) SuperCharger Cams 5) CNC'd Ported Head With 5 Angle Valve Job 6) DLC Shim Buckets 7) Alba Slip-On Exhaust 8) Carrillo Rods 9) Cometic Gasket Kit 10) PC V With Auto Tune 11) Auto Meter C2 AFR Gauge (received from UTVINC 3/27/12) 12) Auto Meter C2 Boost Gauge (received from UTVINC 3/27/12) 13) Auto Meter C2 Oil Pressure Gauge (received from UTVINC 3/27/12) 14) Auto Meter C2 Water Temp Gauge (received from UTVINC 3/27/12) 15) Auto Meter C2 Volt Gauge (received from UTVINC 3/27/12) 16) KING SHOCKS (received from Racer Tech 3/28/12) Installed the front KING SHOCKS after the UPS man delivered them at 8:00PM tonight (3/28/12)... Nate installed the rear KING SHOCKS tonight (3/29/12)... 2012-03-29_16-46-46_889.jpg
__________________
timaz@cableone.net 928-273-4249 Last edited by swingarm1; April 4th, 2012 at 10:03 AM.
|
|
#33
March 29th, 2012, 08:13 PM
|
||||
|
||||
|
Re: ProCharger Air To Water 10 PSI Build
Great looking shocks...nice build Tim!
|
|
#34
March 29th, 2012, 08:21 PM
|
||||
|
||||
|
Re: ProCharger Air To Water 10 PSI Build
Quote: Originally Posted by Norcal RZR
Great looking shocks...nice build Tim!
|
|
#35
March 30th, 2012, 07:10 AM
|
||||
|
||||
|
Re: ProCharger Air To Water 10 PSI Build
2012-03-29_16-46-35_266.jpg
The King Shocks come ready to bolt on... I have the Dual Rate Springs with adjusters...
__________________
timaz@cableone.net 928-273-4249
|
|
#36
March 30th, 2012, 10:42 AM
|
||||
|
||||
|
Re: ProCharger Air To Water 10 PSI Build
I bought my KING SHOCKS from RACER TECH...
The King Shocks come ready to bolt on... I have the Dual Rate Springs with adjusters...
__________________
timaz@cableone.net 928-273-4249
|
|
#37
April 4th, 2012, 10:14 AM
|
||||
|
||||
|
Re: ProCharger Air To Water 10 PSI Build
Motor build starting soon...
__________________
timaz@cableone.net 928-273-4249
|
|
#38
April 4th, 2012, 02:14 PM
|
||||
|
||||
|
Re: ProCharger Air To Water 10 PSI Build
Tim add some preload to your shocks, how much depends on if you have spare and what you carry in the bed. I have about an inch of preload to compensate for rear spare tire and custom cage.
|
|
#39
April 5th, 2012, 06:01 AM
|
||||
|
||||
|
Re: ProCharger Air To Water 10 PSI Build
Quote: Originally Posted by 2011redxp
Tim add some preload to your shocks, how much depends on if you have spare and what you carry in the bed. I have about an inch of preload to compensate for rear spare tire and custom cage.
Thank you...
__________________
timaz@cableone.net 928-273-4249
|
|
#40
April 6th, 2012, 06:20 PM
|
||||
|
||||
|
Re: ProCharger Air To Water 10 PSI Build
Shipped the head today... Porting and +1 valves with the BeeHive Valve Springs...
__________________
timaz@cableone.net 928-273-4249
|
|
#41
April 13th, 2012, 05:51 PM
|
||||
|
||||
|
Re: ProCharger Air To Water 10 PSI Build
I'll have the head back on Tuesday and then the build starts... I had the K&T Billet Intake aligned and mated to the head for max flow results...
__________________
timaz@cableone.net 928-273-4249
|
|
#42
April 18th, 2012, 06:14 AM
|
||||
|
||||
|
Re: ProCharger Air To Water 10 PSI Build
The K&T Billet Intake isn't compatible with a ported head... I had the intake bored to match the intake ports...
In K&T's defense they can't & didn't know what size my ported intake was...
__________________
timaz@cableone.net 928-273-4249
|
|
#43
April 18th, 2012, 06:17 AM
|
||||
|
||||
|
Re: ProCharger Air To Water 10 PSI Build
This ProCharger SuperCharged XP will be on display in the arena at the Rally On The Rocks...
__________________
timaz@cableone.net 928-273-4249
|
|
#44
April 20th, 2012, 08:00 AM
|
||||
|
||||
|
Re: ProCharger Air To Water 10 PSI Build
Quote: Originally Posted by swingarm1
This ProCharger SuperCharged XP will be on display in the arena at the Rally On The Rocks...
Installed my CNC'D Ported Head with+ Valves... Shimming the valves today too... I'll be setting the engine back in soon...
__________________
timaz@cableone.net 928-273-4249
|
|
#45
April 20th, 2012, 01:03 PM
|
||||
|
||||
|
Re: ProCharger Air To Water 10 PSI Build
Can't wait to hear about how it runs...
__________________
2012 900 rzr xp White Lightening,......Supercharged by TAGTEAM...tuned by GWPtuning!!!  07 Renegade 1026cc FCP stroker motor, THEBOM super race heads, THEBOM super TB, GHR turmoil exhaust, GHR q-jection ecm, Brooks 8" stretch, AIRDAM clutch, mrrpm intake, cannon oil cooler kit
|
|
Lower Navigation
|
||||||
|
||||||
| Search tags for this page |
how to build 10 psi with fan,procharger for polaris rzr 900,procharger for rzr xp,procharger polaris rzr 900,procharger rzr,procharger rzr xp,procharger rzr xp dyno,rzr 900 dlc shim buckets,rzr oil cooler,rzr procharger,rzr procharger forum,rzr xp exhaust dyno ,by date,rzr xp intake,rzr xp procharger do in the water,supercharged 900 rzr polaris
Click on a term to search our sites for related topics.
|
| Thread Tools | |
| Display Modes | |
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| FJK's 2012 XP Build Thread , From The Crate To the Desert, And Everything In Between | FJK | RZR XP 900 | 1036 | May 13th, 2013 07:14 AM |
| XP Procharger | faster346 | RZR XP 900 | 33 | September 27th, 2012 10:47 AM |
| 6900+ Miles On My XP As The Motor Build Continues On The ProCharger SuperCharger | swingarm1 | TAGTEAM | 121 | March 11th, 2012 08:05 AM |
| K&T vs Procharger | controlled force | RZR XP 900 | 20 | December 29th, 2011 08:33 AM |
| Procharger | waynesoffroad | Forced Induction | 34 | January 29th, 2010 09:06 AM |
OLD RED
OLD RED
Linear Mode
