Another lift/wheel spacer "Q"

I have a 09 bone stock with steel wheels. I'm wanting to put a 2" lift of some kind. cant afford to put offset wheels on so i will put wheel spacers on. can some one advise me if i go 2" high, will i need 2" wider or 1.5. what are you all are doing if you run stock steel wheels? And one more "Q", Where could i get lift, spacers, and finder flares all at the same time? Im not good at searching this internet thing. Thanks

I have my 2" lift kits in stock and I have 1" wide aluminum wheel spacers in stock, you would have to find another supplier for the fender flares. Let me know if I can help you out. The kit is $189 U.S. shipping included and I could sell you 2 pairs of 1" wide spacers for $85/pair shipping included. Let me know, thanks.

Paul.

is 1" enough or do we need the 1.5"

__________________
2008 Polaris RZR - 29.5" Laws - UTV Concepts Stereo - 2" Lift kit - Polaris Sport Roof - Dynatek CDI- Viper 3500 Winch - Custom Snorkels - HL Lift Springs - RZR S Exhaust

1" will make sure the stock steel 12" wheels clear your rear shock if the machine is in fact one that might have an interference issue. A 2" lift kit will make the wheels pull in about a 1/2" per side, so 1" spacers would put them out a 1/2" per side from stock after the lift is installed.

so it sounds like what rubberdown is saying to have as much stability as i have now, then need 2" spacers and would end up with 1.5 after 2" lift with my stock wheels. thanks.