super atv long travel

trailblazer · #1 March 7th, 2010, 08:23 AM

well, its been out on the market for a while now, is any body running the 799.95 long travel special? an what do you think of it. im not looking for anybody to try to compare it to the 2 and 3 thousand dollar setups, but is it worth the money and how diff. to install?

mnrzr-s · #2 March 7th, 2010, 08:30 AM

I'm interested in feedback as well.

btw, nice avatar

**greenmachine** · #3 March 7th, 2010, 12:07 PM

I'm running that kit and happy so far, instal was not that bad van be done in a afternoon or couple hours with some buddies help. I havnt had and problems with it so far would. All my buddies. Have since bought the same kit and they are also happy. Hope this is some help for you

**Lo64chvy** · #4 March 7th, 2010, 12:21 PM

Happy with mine so far, haven't been on a riding trip yet besides around the house. Quality is good and install is fairly easy with help from your friends!

**greenmachine** · #5 March 7th, 2010, 12:39 PM

Calling 195ranger where is your coment

**195ranger** · #6 March 7th, 2010, 01:16 PM

Quote: Originally Posted by greenmachine

Calling 195ranger where is your coment

I am very happy with this kit also. It was very easy to install. If I had another RZR I would buy this kit again for it.

Ryan31783 · #7 March 7th, 2010, 01:18 PM

do a search, there is a thread with literally HUNDREDS of replies with ALL the info you would ever need.

**swingarm1** · #8 March 7th, 2010, 01:55 PM

Quote: Originally Posted by 195ranger

Quote: Originally Posted by greenmachine

Calling 195ranger where is your coment

I am very happy with this kit also. It was very easy to install. If I had another RZR I would buy this kit again for it.

X 2...

trailblazer · #9 March 7th, 2010, 02:38 PM

did everybody just use the xtended axle shafts with their old cv's? or did you guys buy the set with the whole new axles.
ive got another cv going out up frt and was about ready to buy a replacement gorilla, but thats 500 bucks and that would go along way towards buying the long travel kit. would you say it is in fact about the width of a std rzr-s? i need to be careful about being too wide. ride mostly trails and therefore cant get too extreme.
james

**swingarm1** · #10 March 7th, 2010, 03:56 PM

Quote: Originally Posted by trailblazer

did everybody just use the xtended axle shafts with their old cv's? or did you guys buy the set with the whole new axles.
ive got another cv going out up frt and was about ready to buy a replacement gorilla, but thats 500 bucks and that would go along way towards buying the long travel kit. would you say it is in fact about the width of a std rzr-s? i need to be careful about being too wide. ride mostly trails and therefore cant get too extreme.
james

I bought the kit with the complete axles...

**greenmachine** · #11 March 7th, 2010, 04:10 PM

i used the xtended shafts

**195ranger** · #12 March 7th, 2010, 04:21 PM

I bought the kit with the Rino axles. The Rino axles and cv joints are larger the the stock parts.

jsn · #13 March 7th, 2010, 04:44 PM

i took mine out today and broke the sway bar bolt off the back

mikd · #14 March 7th, 2010, 05:03 PM

install is cake, directions are a little weak but most of it is self explanetory anyway. weak points on mine (i have a very early kit) are the shock relocation brackets and the rear sway bar bolts. the sway bar itself is very tight, probably great for high speed stability but overkill for me. i have been running it without the sway bar and love it. overall it is not a high end kit with georgous welds that you want to show off to your friends, it is a practical kit that seems to be working out quite well. if i had another rzr i would absolutely not hesitate to buy a second satv kit. of the few issues i had with my early kit satv has been excelent to work with, thier customer service has been first rate. to me it all depends on what you want from a kit, there are quite a few vendors on here that sell absolutely georgous setups if you've got the cash.

**ArmyRZR** · #15 March 7th, 2010, 06:07 PM

Anyone running this with the 6 inch brackets. I talked to Turner cycles and they will still make these brackets. Just wondering about how the axles and kit handle it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Super ATV +6 billet aluminum long travel kit	scottbrixie	Suspension	0	February 19th, 2010 01:13 AM
Super ATV Long Travel Kits	Super ATV	Super ATV	11	September 5th, 2009 08:23 AM
Long Travel Kit Super Duper Deal Of The Year	UTV Inc.	UTV Inc	25	October 13th, 2008 07:49 PM
CST 3+ long travel	Rhino Bob	Suspension	2	May 30th, 2008 07:29 PM
New Long travel kit out!!	trevorsride	Suspension	3	September 22nd, 2007 10:12 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)