We removed the factory seat belts and are having a little difficulty installing harnesses on our rzr. Where or to what do we bolt the lap belt to on the right (passender side) and left (driver's side)? Do we drill a hole in whatever metal is in the area where it should go and bolt it in? Where is the best place to put those two bolts?

__________________
2008 Polaris Rzr
2003 Polaris Predator 500
2003 Polaris Trailblazer 400
2 - 2003 Kawasaki STX 12F Jetskis

Just use the same hole the original retractors were mounted to. You'll need to take out a few plastic rivets in order to pull the plastic away enough to reach in & hold a nut in place.

__________________
_______________________________

Now a 2-Rzr household.
Romeo, MI
http://tinyurl.com/8ltm8
______________________________

Ok, my husband says he knows what your talking about. We didnt even think about the retractors. Thank you very much for your help.

My pleasure...
:-)

Kim..

If You Cant Figure It Out, Bring It Down Here And Ill Install Them For You. Free Of Charge.

__________________

4244 W Dunlap Ave // Phx, AZ 85051
Ph. 623.934.3070 // Fax 623.934.043

Ok, thank you....we actually purchased them from you Saturday. I will let you know if we cant get them figured out. Thanks again.

OK, we got the harnesses installed. But, the straps wrap around the back bar on the roll cage and they slide around. That cant be safe. What do we need to do to stop them from sliding?

Once you get them tightened down they don't move while riding.

__________________
Sleep safe in your beds because rough men stand ready in the night to visit violence on those who would do you harm.

You can install what are known as Footman loops to the back side of the roll bar to keep the straps from sliding. They are a few bucks and require you to drill mounting holes and then rivet(3/16) them in place. I found a place where you can get them in different colors to either match or contrast the roll bar color CLICK ME

PS: Make sure you get the 2" version.

I wish you guys were in SoCal ...

Always helping out the members!

Movie showings on a big screens(26' x26'), with free food ... (I am tepmted to drive out for)

When I need something, you guys have got me as a customer ...

Chris Ward

2 ways to keep the straps from moving:
Put a square of 2-sided carpet tape between the webbing & the rollbar.
Cross the straps behind the seat so they stay in the center. Might chafe the seat or your neck, though--I haven't tried this.

Thanks for the help...