Polaris RZR Forum - RZR Forums.net banner

2016 S 900 Pretty Much Finished

6K views 14 replies 7 participants last post by  TNWoodie 
#1 · (Edited)
Got this baby in July, traded a 2014 800S. I have made pretty much all the changes I intend, so here it is.


Roof is fom Spike Powersports, I like the way it blends in with the stock visor. Some complain that water will run in when it rains but is you don't have a full enclosure you're going to get wet.

Half Windshield is from EMP. It was a good value for scratch resistant and the straps holding it on make it real easy to remove. I found a way to lay it down on the hood using just two straps to get it out of the way when it was really muddy. A design feature that I appreciate are the bends at the top and bottom. I am pretty sure that this makes it much stiffer.

Bottom 3/4 doors are from UTV Giant, an extremely good value and they do the job and look good as well.

Mirrors are Kolpin, very inexpensive and do the job. The don't look half bad either.

Tree Kickers are from Polaris. I thought that they might play better with the skid plate, but I was wrong. I had to modify the steel parts that wrap around the bottom because they partially cover the mounting holes the tree kickers
need to go in.

Skid Plate from Tusk. 3/8 inch thick UHMW. Good protection and the best value I could find.

Front bumper and winch are from SuperATV. I really like the winch with the wireless remote and I also adapted the wired remote to a switch on the dash. The bumper fit well adnd I like the way it looks. The color wasn't an exact match to the
body "Spectra Orange".

Dual Rate Springs from Schmidty Racing. They had what I wanted when I wanted it. I really like the "race" hardware, billet tops and bottoms for the springs. I went with the medium setup because I didn't want the heavy and wasn't sure about the soft.


Front A-Arms. I got the lowers from Offroad Beast. I didn't want any change to the geometry of the machine and I am real impressed with the massive tubing used. I also like the fact that they are made right here in good ole Tennessee.


Fender Flares from Mudbuster. Another good value and I like the way the rear swoops down and back in the rear.


Harness and Passthrough from Dragonfire. The pass through was a chore to install but it does make the shoulder belts more comfortable. There are quick connects on the shoulder belts from Dragonfire as well. Makes seat removal a breeze.



Wheels, STI HD beadlocks. 12"

Tires, Tusk Terrabites, 27x9-12 all the way around. I am extremely happy with these tires. They are great on pavement (DOT approved), and every bit as good as Dirt Commanders, Rocktanes, and Bighorns in all the conditions I have ridden here in Tennessee. That's pavement, gravel, dirt, mud and rocks. Another great value.

Bushings from Super Dave's. I have replace any bushings that are on a part of the machine that is getting work done. All I have left is the inner rear a-arms.

Rear Sway Bar. I removed that before I ever drove anywhere. I want all the articulation and indepence I can get in the rear.

Drive Belt, Gates carbon fiber. Replaced it right away and carry the OEM for a spare.

Parking Brake, Spring Brake Thingy. Works great, right price. Kudos.

Trail Control shifter. I didn't like the combination of materials, polished stainless, black rubber, brushed nickel, so I painted the shifter handle and the plate that holds down the boot with satin black rattle can paint.


Tablet Mount, I guess I forgot the Ram Mount for my tablet since I already had that from the 800S I traded.

Street Legal. I did all this myself, design and installation. Got parts from Amazon, WalMart, and elsewhere. There is a posts in the Budget Mod thread, it's down two posts, I can't figure out how to link the specific post. http://www.rzrforums.net/projects-how/22190-lets-see-your-budget-mods-154.html#post4016937

Parts List for Turn Signals:

Turn Signal Switch $27.47 UTV Inc Link

Front LEDs $15.78 Link

Plate LEDs $7.88 Link

Electronic Taillight Converter $18.79 Wal-Mart (Hopkins 48895 LED Compatible Taillight Converter) Link

Flasher Relay $ 6.12 Link

Butt Connectors $11.99 Link

2 pin Plugs $8.99 (8 each, male and female) Link

4 pin Plugs $15.65 Mauser Electronics

Wire Lowes $12.00

Split Wire Loom $5.00 Lowes

Wire Loom Tape $5.90 Link
 
See less See more
8
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top