C-Clip Eliminator?

**MadNess** · #1 February 8th, 2010, 08:27 PM

Ive never seen inside the S differentials, is there room for a C-Clip Eliminator setup? or do these axles actually attach some different crazy way?

Im peeved at Polaris at the moment, my new S with less than 10 hours on the clock has already spit the left side rear shaft out of the carrier

**Tuf-Skin** · #2 February 8th, 2010, 08:29 PM

what is a c-clip eliminator?

The early 2009 RZR-S had a machining error in the diff that let the c-clip pop out too easy.

**MadNess** · #3 February 8th, 2010, 08:32 PM

Quote: Originally Posted by Tuf-Skin

what is a c-clip eliminator?

The early 2009 RZR-S had a machining error in the diff that let the c-clip pop out too easy.

my 2010 seems to have the same issues the 09 is reported to have... why, I do not know...

what is a c-clip eliminator?

Strange Safety Hubs C-Clip Eliminators - SummitRacing.com

Basically, its a device that deletes the C-Clip retainer and uses a better solution to keep the axles in place.

**Tuf-Skin** · #4 February 8th, 2010, 08:34 PM

hmm,, I don't think there would be room for those, but I don't know... Interesting idea if they are compatible.

**rjsmith** · #5 February 8th, 2010, 08:41 PM

I dont see how this would work on the RZR diff, there is very little room between the diff and the CV joint, no place to bolt these to and how would you slide the bearing over the spline. These appear to be just an extra bearing on the outside that is pressed against the spline and stops it from sliding out. Great ide but do not see how it could work for our application.

**MadNess** · #6 February 8th, 2010, 08:42 PM

Quote: Originally Posted by rjsmith

I dont see how this would work on the RZR diff, there is very little room between the diff and the CV joint, no place to bolt these to and how would you slide the bearing over the spline. These appear to be just an extra bearing on the outside that is pressed against the spline and stops it from sliding out. Great ide but do not see how it could work for our application.

kinda figured, just curious... Im starting to doubt my purchase

Dave I. · #7 February 8th, 2010, 08:43 PM

Those just keep the axle on a car style rear end from spitting out when the axle twists off inside the housing. Different than how the rzr is setup.

**johnnycat8** · #8 February 8th, 2010, 08:49 PM

ya no c clip kit for the rzr its not your chevy rear end.... nice idea thought

CSG · #9 February 9th, 2010, 10:33 AM

Besides c-clip eliminators are a pain in the ass if you do things other then go straight.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Piston C clip tools.	milosusa	Engine and Drivetrain	6	January 14th, 2010 07:20 PM
BAJA 500 clip	DAVENJ	Desert Racing	9	October 25th, 2009 07:24 AM
Short clip plowing	luckylarry	RZR-S Specific Discussion	3	December 19th, 2008 10:13 PM
Gibson sound clip	Trey	Engine and Drivetrain	0	September 16th, 2008 06:54 PM
Plastic clip question	svt_22	General RZR Discussion	10	June 30th, 2008 09:06 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)