Polaris RZR Forum - RZR Forums.net banner

Aluminum Odyssey 925 battery box for gen1

3K views 10 replies 7 participants last post by  twvette 
#1 · (Edited)
I was going to do the stock Ranger plastic battery box to run the Odyssey 925 battery in my gen1 as it is already known to work just fine but apparently some Ranger owners have had issues with them breaking over time so found an aluminum one on eBay. Spoke with the seller and was great to work with and even made me a top bracket so would not have to use the stock bracket. It weighs almost nothing and is a nice piece. It fits like a glove. Used the custom top bracket with a 3/8in nylon spacer and 1 1/4in long x 20 x 1/4 bolt on each side to mount it to the frame in the stock gen1 threaded holes with some locktite. Might need to open up the mounting holes in the aluminum box or top bracket to get it to line up with the stock holes but that is very easily done with a drill. Here are some pics:

If anyone can comment on if this box works with gen2 or gen3 would be great.



Image uploading. Refresh page to view


Image uploading. Refresh page to view


 
See less See more
4
#11 ·
Glad to hear is still around and offering these ... he is a great guy. It was actually rediculous how much help he gave me for a product that cost so little and could be much more expensive ... not sure how he makes a profit.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top