Anybody know where they are listed yet? Nothing on purepolaris.com. Or how about a PDF?

Also wondering if they have got the new unvented fuel cans which they have been promising for a while too (they had better use the existing mounts otherwise there are going to be a lot of annoyed peeps!).

UTV Off Road magazine has some of the new accessories at the end of this website article. I like the header. Should go on the stock pipe too and allow more low and midrange power for less than a full system.

UTV Off-Road Magazine :: Everything Side-By-Side for the Off-Road Enthusiast

Yep, saw that which got me looking - but can't find them anywhere.

Wonder how much they're wanting for the optional Walker-Evans shocks, and if they'll fit my 08.....hmmmmm

__________________

26" Maxxis Bighorns, Highlifter springs, Rubberdown 2" lift kit, Hunterworks 1.5" wheel spacers on the back, Warn 3500, Pre-runner bumper and rock sliders, F&R cv covers, Front swaybars off, Overfender mud flaps, DFR harness.

My Polaris dealer says headers are in stock at Polaris. W/E shocks as well (expensive). They also received the new parts catalog last week.

On that basis I would expect the fact that the parts catalogue is duplicated on about 50,000 different dealer websites we ought to see a listing soon

Unless it's shared from a central server, which wouldn't be improbable since all the dealer websites seem to have the same interface?

Canyonman, what price did they give you for the header?

$240 apiece for two. I think one would have been 260-280.

Fanjules,

The catalog was in a binder. They did look the part numbers up in the computer though.

Somebody on prc has a copy of the catalogue now, albeit only in paper form. A pdf would be nice!

Aside from the fuel cans, I'm wondering if they have mounts for the tracks yet. I've heard there are all sorts of goodies to waste your money on now, though it would be kind of silly to not fix a couple of things from the 08 range!

What about retro fit half doors, something like the Rhinos have. If Polaris don't make them I think and after market vendor would sell a boat load if reasonably priced. The net just doesn't keep my knees in as well as I would like. They are a pain to latch/unlatch.

Factoryutv.net or .com can't remeber but check out those doors.

the catalog has tracks, we shocks, full skids, cabs, some billet pieces, seat covers, seats, sliders that maount to stock seats that allow them to slide like a car, new paint, pipes, plastic , flares, wheels/tires, gas cans/carriers, stereos, mounts, bed extenders, and alot more.....ill try to find pics

__________________
hc pistons,port work,valves, springs,guides,clutch kit,bored throttle body, pushrods,cam,and oil cooler from hpd,maier hood,black t-7 w/red beadlocks,maxxis 4-speeds,mb cage,LTE SINGLE, dragonfire airbox,lonestar brace and gussets,utvcrap tubes,pro ALUM bumper,emp skid,crow 4point. pcIII ,hotride ecu,custom gusseting,shawz panels and +4 with fox shocks,billet handle, cupholders, speedo, rails, cap,shifter ,polaris suspension seats, piaa lights

The only dealer in town could not find or get anything '09 related. I even gave them the part number for the new locking glove box and all they gave me where the deer in the headlights look.
So please someone link us to a pdf file to see whats new.

PDF! PDF! PDF! We wanna a PDF!