Lets discuss rollovers!!

How many people have had a rollover in their rzr so far and if so, how much damage did it cause???

How much damage has everything to do with how fast you were going when you rolled, buddy rolled mine around 5 mph, and I have just a few scratched behind the driver on the bed (did have to straighten a bracket too.) But I have seen much worse here on the forum at higher speeds...

On this end over end rollover in Moab I destroyed the front end and radiator. Broke the back bed in 2 places. Punched holes in both front fenders. Ended up getting a whole new body from top to bottom.

__________________
Chris
08 LT RZR MCX-Turbo
North Missouri

WOW acad54, you did a good job on that one man!! Any injuries??

Don't let friends drive drunk

Brian

__________________
Otsego, Mi
08 Mean Green

Rolled mine trying to do a 360 in the sand... Didn't know any better at the time.....

Went over on the right side in pretty much slo-mo. Popped a hole in the right front fender and lost some plastic body rivets which I have to find out how to replace but otherwise that was it.

Soft surface, slow rollover.

__________________
Steve

should also add why did it happen ex...going to fast doing dounuts ect..

__________________
lots of toy's
http://www.makintraxsuspension.com/

mines been over 4 times scratches to $4800 last one needed new frame new cage all plastic 2 rims and both bumper + misc small stuff

that's what I thought as it makes a difference which is why I included it. I agree that without that information, it's relatively useless.

__________________
Steve

30 mph powerslide in loose gravel.....wham.....slight scratches but with marble dip over black plastic you would never know if i didnt point them out......pushed top of cage over a little but not enough that a ratchet strap wouldnt pull it back over........oh and wear you seatbelts/harnesses....i wasnt.....broke 2 ribs.......and never ever say the famous last words...........hey yall.. watch this......i should have known i was in for it..lol...

__________________
hc pistons,port work,valves, springs,guides,clutch kit,bored throttle body, pushrods,cam,and oil cooler from hpd,maier hood,black t-7 w/red beadlocks,maxxis 4-speeds,mb cage,LTE SINGLE, dragonfire airbox,lonestar brace and gussets,utvcrap tubes,pro ALUM bumper,emp skid,crow 4point. pcIII ,hotride ecu,custom gusseting,shawz panels and +4 with fox shocks,billet handle, cupholders, speedo, rails, cap,shifter ,polaris suspension seats, piaa lights

WAs at a stop, cranked the wheel and goosed it. Never moved forward, just over. Broken bed, punched out front fender, bent rock slider, bent roll cage.

Trying to do a donut behine my house goiung about 10 mph went ove ron left side. Punched small hole in right front fender, bent right side roll cage slightly and cracked right rear plastic. Going to claim it on insurance Monday.

__________________
2008 Polaris RZR - 29.5" Outlaws - SS 312 - SSV Works Overhead System - 2" Lift kit - Polaris Sport Roof - Dynatek CDI- Viper 3500 Winch - Custom Snorkels - HL Lift Springs - RZR S Exhaust

Hard night of fun. In by 8:00 am. Woke up @ 10:30. First beer @ 11:00. Rolled the RZR by 12:00 pm. 30mph power slide until I hit some gravel. Came out unscathed. Bent the roll cage over to one side about 4 inches. Got out through the wind shield. Rolled it back over & fired it up. Then said sorry to the passenger who shit himself. Have to tie the ratchet straps to it to staighten it out.

hmmm i think also anotheir add 4x4 or 2wd see if that makes any diff seems most roll overs are fast donuts then fast corners anothier add stock width or wider? i also forgot to add my roll over going sidehill and turned going up and fell on side just some minor scratches was in sand and all my fault i was in awd turned real fast i see a trend here..oh yes a few beers also cant forget that little one.....lol

__________________
lots of toy's
http://www.makintraxsuspension.com/

No injuries. Freaked out the girlfriend a little, that's about it.

__________________
Chris
08 LT RZR MCX-Turbo
North Missouri